• Code: E730-A006
• Description: PDL communication error
  No reply from PDL. Due to failure of Subbootable, or no existence, there is no reply from PDL.
• Remedy: 1. PDL reset processing. 2. Turn OFF and then ON the power. 3. Check the connection of the Main Controller PCB. 4. Reinstall the firmware. 5. Replace the Main Controller PCB.

• Code: E730-A007
• Description: Mismatched PDL version
  Version of the host machine control software and version of PDL control software are different
• Remedy: 1. PDL reset processing. 2. Turn OFF and then ON the power. 3. System All Format and installation.

• Code: E730-B013
• Description: PDL embedded font error
  Font data is corrupted.
• Remedy: 1. Turn OFF and then ON the power. 2. Reinstall the system. 3. System All Format and installation.

• Code: E732-0000
• Description: Reader communication error
  Negotiation failure.
• Remedy: 1. Check the connection of the Connector with the Reader. 2. Check the power of the Reader (check if the initialization operation is executed at startup). 3. Replace the Reader Controller PCB and the Main Controller PCB.

• Code: E732-0001
• Description: Reader communication error
  Communication error.
• Remedy: 1. Check the connection of the Connector with the Reader. 2. Check the power of the Reader (check if the initialization operation is executed at startup). 3. Replace the Reader Controller PCB and the Main Controller PCB.

• Code: E732-0010
• Description: Reader communication error
  Unable to detect Vsync from the Reader Controller although 2 minutes have passed after the completion of register setting of the Main Controller.
• Remedy: 1. Check the connection of the Connector with the Reader. 2. Check the power of the Reader (check if the initialization operation is executed at startup). 3. Replace the Reader Controller PCB and the Main Controller PCB.

• Code: E732-0021
• Description: Reader communication error
  Communication error
• Remedy: 1. Check the connection of the Connector with the Reader. 2. Check the power of the Reader (check if the initialization operation is executed at startup). 3. Replace the Reader Controller PCB and the Main Controller PCB.

• Code: E732-8888
• Description: Error in the reader type
  When a scanner for the different model is detected during the communication with the reader
• Remedy: Replace to the proper reader.