Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon iR Advance 4235i — Trang 31/31

Code: E840-0001

Description: Failure of Fixing Film Edge Cooling Fan (Rear) (FM1)
When the lock signal is detected for 15 sec while the fixing film edge cooling fan (rear) stops. * The same status is detected again after the retry operation.
Remedy: 1. Check connection of the Connectors (J2036/J215). 2. Replace the fixing film edge cooling fan (rear) (FM1) 3. Replace the DC controller PCB (UN2).

Code: E840-0002

Description: Rotation error of Fixing Film Edge Cooling Fan (Rear) (FM1)
When the lock signal is detected for 15 sec while the fixing film cooling fan (rear) operates. * The same status is detected again after the retry operation.
Remedy: 1. Check connection of the Connectors (J2036/J215). 2. Replace the fixing film edge cooling fan (rear) (FM1) 3. Replace the DC controller PCB (UN2).

Code: E840-0003

Description: Failure of Fixing Film Edge Cooling Fan (Front) (FM2)
When the lock signal is detected for 15 sec while the fixing film edge cooling fan (front) stops. * The same status is detected again after the retry operation.
Remedy: 1. Check connection of the Connectors (J2035/J215). 2. Replace the fixing film edge Cooling fan (front) (FM2) 3. Replace the DC controller PCB (UN2).

Code: E840-0004

Description: Rotation error of Fixing Film Edge Cooling Fan (Front) (FM2)
When the lock signal is detected for 15 sec while the fixing film edge cooling fan (front) operates. * The same status is detected again after the retry operation.
Remedy: 1. Check connection of the Connectors (J2035/J215). 2. Replace the fixing film edge cooling fan (front) (FM2). 3. Replace the DC controller PCB (UN2).

Code: E880-0001

Description: Controller Cooling Fan error
The failure of the controller cooling fan (FM12) is detected.
Remedy: 1. Check the connector (J1015). 2. Replace the controller cooling fan (FM12). 3. Replace the main controller PCB 1 (UN25).

Code: E880-0005

Description: Controller Cooling Fan error
1. Check the connector (J1015). 2. Replace the controller cooling fan (FM12). 3. Replace the main controller PCB 1 (UN25).
Remedy: Controller Cooling Fan (FM12) is detected.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie