Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon iR Advance 4245i — Trang 26/31

Code: E719-0011

Description: Error when the Card Reader is started
The Card Reader which was connected before turning OFF the power is not connected at power-on.
Remedy: Check the cable, and then go through the following to clear the error: Service Mode > COPIER > FUNCTION > CLEAR > ERR.

Code: E719-0012

Description: IPC error at Card Reader operation
Open circuit of IPC, unable to recover the IPC communication.
Remedy: Check the cable, and then go through the following to clear the error: Service Mode > COPIER > FUNCTION > CLEAR > ERR.

Code: E719-0031

Description: Communication error when the Card Reader (serial) is started
Unable to start communication with the Card Reader at startup.
Remedy: 1. Check the cable connection of the Card Reader (connector connection error, open circuit), and then go through the following to clear the error: Service Mode > COPIER > FUNCTION > CLEAR > ERR. 2. After removing the Card Reader, execute the following service mode, and then reinstall the Card Reader. • COPIER>FUNCTION>CLEAR>CARD • COPIER>FUNCTION>CLEAR>ERR"

Code: E719-0032

Description: Communication error after the Card Reader (serial) is started
Although communication with the Card Reader was possible at startup, it became unavailable in the middle of it.
Remedy: Check the cable connection of the Card Reader (connector connection error, open circuit), and then go through the following to clear the error: Service Mode > COPIER > FUNCTION > CLEAR > ERR.

Code: E730-1001

Description: PDL software error
Systematic fatal error, such as initialization failure, occurs.
Remedy: 1. PDL reset processing. 2. Turn OFF and then ON the power.

Code: E730-100A

Description: PDL software error
Systematic fatal error, such as initialization failure, occurs.
Remedy: 1. PDL reset processing. 2. Turn OFF and then ON the power.

Code: E730-9004

Description: Third party PDL communication error
Communication error with the print server.
Remedy: 1. Turn OFF and then ON the power. 2. Check the cable connection. 3. Replace the Open I/F PCB, F Link PCB (Main/Sub). 4. Replace the Main Controller PCB.

Code: E730-9005

Description: Third party PDL communication error
Error in video cable connection with the print server.
Remedy: 1. Turn OFF and then ON the power. 2. Check the cable connection. 3. Replace the Open I/F PCB, F Link PCB (Main/Sub). 4. Replace the Main Controller PCB.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie