Code :

Code: 733-0F02-05
Description: Printer communication error
Causes: Communication error that can be recovered by reboot If it is detected again immediately after reboot, E733-0002 is generated.
Remedy: It is not necessary to perform a remedy because the machine is automatically rebooted after log collection.

Code: 733-F000-05
Description: Printer communication error
Causes: Disconnection of a cable between the Main Controller PCB and the DC Controller PCB was detected.
Remedy: [Remedy] Check/replace the harness between the DC Controller PCB and the Main Controller PCB.

Code: 733-F001-05
Description: Printer communication error
Causes: Disconnection of a cable between the Main Controller PCB and the DC Controller PCB was detected.
Remedy: [Remedy] Check/replace the harness between the DC Controller PCB and the Main Controller PCB.

Code: 733-F002-05
Description: Printer communication error
Causes: Disconnection of a cable between the Main Controller PCB and the DC Controller PCB was detected.
Remedy: [Remedy] Check/replace the harness between the DC Controller PCB and the Main Controller PCB.

Code: 743-0000-04
Description: Communication error
Causes: The Reader Controller PCB detected a communication error between the Main Controller PCB and the Reader Controller PCB.
Remedy: [Related parts] R1.00 - Harness between the Reader Controller PCB (UN_BO1/J109) and the Riser PCB (UN14/J4031) - Reader Controller PCB (UN_BO1) - Riser PCB (UN14) - Main Controller PCB (UN25) [Remedy] Check/replace the related harness/cable, connector and parts. [Reference] Before replacing the Reader Controller PCB, back up the service mode data (approx. 2 min) and restore the backup data after the replacement so the data may be able to be protected. - Backup: COPIER (LEVEL2)> FUNCTION> SYSTEM> RSRAMBUP - Restoration: COPIER (LEVEL2)> FUNCTION> SYSTEM> RSRAMRES

Code: 743-0000-05
Description: DDI communication error
Causes: The Reader Controller PCB detected the communication error between the Main Controller PCB and the Reader Controller PCB.
Remedy: [Related parts] - Harness connecting from the DC Controller PCB (UN2) to the Reader Controller PCB (UN_B01). - Reader Controller PCB (UN_B01) - DC Controller PCB (UN2) [Remedy] 1.Check/replace the related harness/cable, connector and parts. 2.Replace the Reader Controller PCB. 3.Replace the DC Controller PCB. [Reference] Before replacing the DC Controller PCB, back up the service mode data and restore the backup data after the replacement so the data may be able to be protected. - Backup: COPIER (LEVEL2)> FUNCTION> SYSTEM> DSRAMBUP - Restoration: COPIER (LEVEL2)> FUNCTION> SYSTEM> DSRAMRES

Code: 744-0001-00
Description: Language file error
Causes: The language file in HDD was not supported by the version of Bootable.
Remedy: Reinstall the correct language file using SST or USB memory reinstall the entire software.