Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon iR Advance 4551i — Trang 11/64

Code: 354-0001-00

Description: System error
Causes: System error
Remedy: Contact the service company office

Code: 354-0002-00

Description: System error
Causes: System error
Remedy: Contact the service company office

Code: 355-0001-00

Description: System error
Causes: System error
Remedy: Contact the service company office

Code: 355-0002-00

Description: System error
Causes: System error
Remedy: Contact the service company office

Code: 355-0003-00

Description: System error
Causes: System error
Remedy: Contact the service company office

Code: 355-0004-00

Description: System error
Causes: System error
Remedy: Contact the service company office

Code: 400-0001-04

Description: Communication error
Causes: A communication error between the Reader Controller PCB and the DADF Driver PCB was detected.
Remedy: [Related parts] R1.00 - Harness between the Reader Controller PCB (UN_BO1/J103) and the DADF Driver PCB (PCB1/ J401) - Harness between the Reader Controller PCB (UN_BO1/J104) and the DADF Driver PCB (PCB1/ J402) - DADF Driver PCB (PCB1) - Reader Controller PCB (UN_BO1) [Remedy] Check/replace the related harness/cable, connector and parts. [Reference] Before replacing the Reader Controller PCB, back up the service mode data (approx. 2 min) and restore the backup data after the replacement so the data may be able to be protected. - Backup: COPIER (LEVEL2)> FUNCTION> SYSTEM> RSRAMBUP - Restoration: COPIER (LEVEL2)> FUNCTION> SYSTEM> RSRAMRES

Code: 400-0002-04

Description: Communication error
Causes: A communication error between the Reader Controller PCB and the DADF Driver PCB was detected.
Remedy: [Related parts] R1.00 - Harness between the Reader Controller PCB (UN_BO1/J103) and the DADF Driver PCB (PCB1/ J401) - Harness between the Reader Controller PCB (UN_BO1/J104) and the DADF Driver PCB (PCB1/ J402) - DADF Driver PCB (PCB1) - Reader Controller PCB (UN_BO1) [Remedy] Check/replace the related harness/cable, connector and parts. [Reference] Before replacing the Reader Controller PCB, back up the service mode data (approx. 2 min) and restore the backup data after the replacement so the data may be able to be protected. - Backup: COPIER (LEVEL2)> FUNCTION> SYSTEM> RSRAMBUP - Restoration: COPIER (LEVEL2)> FUNCTION> SYSTEM> RSRAMRES
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie