• Code: E730-B013
• Description: PDL embedded font error
  Broken font data
• Remedy: 1. Turn OFF and then ON the power.
  2. Reinstall the system using SST or USB.
  3. System all format and reinstall the system using SST or USB.

• Code: E730-C000
• Description: Initialization error
  An error, such as failure in memory retrieval at startup, occurs
• Remedy: 1. System all format and installation.
  2. Replace Main Controller PCB (PCB2).

• Code: E730-C001
• Description: HDD access error
  An error occurs when accessing to the HDD
• Remedy: 1. Start in safe mode to format the HDD (all the data in the HDD is erased).
  2. Replace the HDD.
  3. Replace Main Controller PCB (PCB2).

• Code: E731-3000
• Description: Error in Main Controller PCB
  Unable to recognize the Surf board
• Remedy: 1. Check connection of Main Controller PCB.
  2. Replace Main Controller PCB (PCB2).

• Code: E731-3001
• Description: Error in Main Controller PCB
  Failure in Surf initialization
• Remedy: 1. Check connection of Main Controller PCB.
  2. Replace Main Controller PCB (PCB2).

• Code: E731-3002
• Description: Error in Main Controller PCB
  Failure in Surf initialization
• Remedy: 1. Check connection of Main Controller PCB.
  2. Replace Main Controller PCB (PCB2).

• Code: E731-3015
• Description: Error in Main Controller PCB
  Although it works normally at the software side, there is no video data into CL1-G
• Remedy: 1. Check connection of Main Controller PCB.
  2. Replace Main Controller PCB (PCB2).

• Code: E732-0010
• Description: Scanner communication error
  Vertical Synchronizing signal detection error
• Remedy: 1. Check the connection of the Connector with the Reader. 2. Check the power of the Reader (check if the initialization operation is executed at startup). 3. Replace the Reader Relay PCB. 4. Replace the Main Controller PCB.