Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon iR Advance 500iF — Trang 8/20

Code: E530-0001

Description: Front Alignment Motor (M4) error
At initialization of the Front Alignment Plate, the Front Alignment Plate failed to move from the Front Alignment Plate HP Sensor (S4) although the Front Alignment Motor (M4) was driven for 10mm.
Remedy: 1. Check the connector connection of the Front Alignment Plate HP Sensor (S4) or the Front Alignment Motor (M4).
2. Replace the Front Alignment Plate HP Sensor (S4).
3. Replace the Front Alignment Motor (M4).
4. Replace the Finisher Controller PCB (PCB1).

Code: E530-0002

Description: Front Alignment Motor (M4) error
At initialization of the Front Alignment Plate, the Front Alignment Plate failed to be detected by the Front Alignment Plate HP Sensor (S4) although the Front Alignment Motor (M4) was driven for 780msec.
Remedy: 1. Check the connector connection of the Front Alignment Plate HP Sensor (S4) or the Front Alignment Motor (M4).
2. Replace the Front Alignment Plate HP Sensor (S4).
3. Replace the Front Alignment Motor (M4).
4. Replace the Finisher Controller PCB (PCB1).

Code: E531-8001

Description: Staple Motor (M9) error
The Stapler failed to move from the Staple HP Sensor (S11) within the staple execution time (450msec).
Remedy: 1. Check the connector connection of the Staple Unit.
2. Replace the Staple Unit.
3. Replace the Finisher Controller PCB (PCB1).

Code: E531-8002

Description: Staple Motor (M9) error
After execution of staple operation, the Staple Unit could not be detected by the Staple HP Sensor (S11) within 460msec although the motor was operated in the positive direction. And then, the Staple Unit could not be detected by the Staple HP Sensor (S11) within 460msec although the motor was rotated in the negative direction.
Remedy: 1. Check the connector connection of the Staple Unit.
2. Replace the Staple Unit.
3. Replace the Finisher Controller PCB (PCB1).

Code: E537-0001

Description: Rear Alignment Motor (M5) error
At initialization of the Rear Alignment Plate, the Rear Alignment Plate failed to move from the Rear Alignment Plate HP Sensor (S5) although the Rear Alignment Motor (M5) was driven for 10mm.
Remedy: 1. Check the connector connection of the Rear Alignment Plate HP Sensor (S5) or the Rear Alignment Motor (M5).
2. Replace the Rear Alignment Plate HP Sensor (S5).
3. Replace the Rear Alignment Motor (M5).
4. Replace the Finisher Controller PCB (PCB1).

Code: E537-0002

Description: Rear Alignment Motor (M5) error
At initialization of the Rear Alignment Plate, the Rear Alignment Plate failed to be detected by the Rear Alignment Plate HP Sensor (S5) although the Rear Alignment Motor (M5) was driven for 760msec.
Remedy: 1. Check the connector connection of the Rear Alignment Plate HP Sensor (S5) or the Rear Alignment Motor (M5).
2. Replace the Rear Alignment Plate HP Sensor (S5).
3. Replace the Rear Alignment Motor (M5).
4. Replace the Finisher Controller PCB (PCB1).

Code: E540-0001

Description: Stack Tray Shift Motor (M8) error
The Stack Tray shifting operation could not be completed although the Stack Tray Shift Motor (M8) was driven for 4.0 seconds.
Remedy: 1. Check the connector connection of the Stack Tray Paper Height Sensor (S9) or the Stack Tray Shift Motor (M8).
2. Replace the Stack Tray Paper Height Sensor (S9).
3. Replace the Stack Tray Shift Motor (M8).
4. Replace the Finisher Controller PCB (PCB1).

Code: E575-0001

Description: Gripper Motor (M7) error
When the Gripper Motor (M7) was driven, the Gripper failed to move from the Gripper HP Sensor (S7) although the Gripper Encoder Sensor (S8) detected the rotation of 100 clocks.
Remedy: 1. Check the connector connection of the Gripper HP Sensor (S7), Gripper Encoder Sensor (S8) or the Gripper Motor (M7).
2. Replace the Gripper HP Sensor (S7).
3. Replace the Gripper Encoder Sensor (S8).
4. Replace the Gripper Motor (M7).
5. Replace the Finisher Controller PCB (PCB1).
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie