• Code: E610-0401
• Description: Failure of the HDD encryption key (hardware configuration error/initialization error/encryption key error/encryption processing error)
  Error is detected during encryption.
• Remedy: Turn OFF and then ON the power.

• Code: E610-0402
• Description: Failure of the HDD encryption key (hardware configuration error/initialization error/encryption key error/encryption processing error)
  Error is detected during decryption.
• Remedy: Turn OFF and then ON the power.

• Code: E610-0501
• Description: Failure of the HDD encryption key (hardware configuration error/initialization error/encryption key error/encryption processing error)
  Error in document management information on /FSTDEV.
• Remedy: Turn OFF and then ON the power.

• Code: E611-0000
• Description: Rebooting due to SRAM corruption when executing a transmission job that secures disconnection of the power
  In the case that reboot is repeated at recovery from power down because SRAM information is corrupted and the job information saved on SRAM cannot be read, the phenomenon that the communication is repeated occurs.
• Remedy: Clear SRAM to erase the job that secures disconnection of the power.

• Code: E674
• Description: FAX error
• Remedy:

• Code: E677
• Description: Print server error
• Remedy:

• Code: E710-0001
• Description: Printer IPC error
  Error is detected by IPC communication IC of the printer engine at power ON.
• Remedy: Disconnection of cable.

• Code: E711-0001
• Description: IPC communication error
  Occurrence of error was set for 4 times or more for 1.5 seconds to the error register of the IPC Chip.
• Remedy: Check the Cable.