Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon iR Advance 6075i — Trang 16/40

Code: E413-0011

Description: DADF Disengagement Motor 2 (M7) error
The DADF Disengagement HP Sensor 2 (SR16) is not turned ON within the specified period of time although the DADF Disengagement Motor 2 (M7) is driven.
Remedy: 1. Connector disconnection/open circuit of the Disengagement HP Sensor 2 (SR16). 2. Connector disconnection/open circuit of the Disengagement Motor 2 (M7). 3. Failure of the Disengagement HP Sensor 2 (SR16). 4. Failure of the Disengagement Motor 2 (M7). 5. Failure of the DADF Driver PCB (PCB1).

Code: E413-0012

Description: DADF Disengagement Motor 2 (M7) error
The DADF Disengagement HP Sensor 2 (SR16) is not turned OFF within the specified period of time although the DADF Disengagement Motor 2 (M7) is driven.
Remedy: 1. Connector disconnection/open circuit of the Disengagement HP Sensor 2 (SR16). 2. Connector disconnection/open circuit of the Disengagement Motor 2 (M7). 3. Failure of the Disengagement HP Sensor 2 (SR16). 4. Failure of the Disengagement Motor 2 (M7). 5. Failure of the DADF Driver PCB (PCB1).

Code: E423-0001

Description: DADF SDRAM error
SDRAM access error.
Remedy: Error in SDRAM (video image memory) on the Reader Controller PCB (PCB1).

Code: E423-0002

Description: DADF SDRAM erroror.
SDRAM Verify error.
Remedy: Error in SDRAM (video image memory) on the Reader Controller PCB (PCB1).

Code: E490-0001

Description: Different DADF model error
Not proper DADF is installed.
Remedy: 1. Installed DADF is a different model. 2. Failure of the Reader Controller PCB (PCB1). 3. Failure of the DC Controller PCB. 4. Failure of the Main Controller PCB.

Code: E500-0000

Description: Communication error (Finisher-E1)
The communication with the host machine is interrupted.
Remedy: 1. The Finisher Controller PCB is faulty. 2. The host machine DC Controller PCB is faulty.

Code: E503-0002

Description: Communication error (Finisher-E1)
The communication with the Saddle Stitcher is interrupted.
Remedy: 1. The wiring between the Finisher Controller PCB and Saddle Controller PCB is faulty. 2. The Finisher Controller PCB is faulty. 3. The Saddle Stitcher Controller PCB is faulty.

Code: E503-0003

Description: Communication error (Finisher-E1/External 2 Hole Puncher)
The communication with the Puncher unit is interrupted.
Remedy: 1. The wiring between the Finisher Controller PCB and host machine DC Controller PCB is faulty. 2. The Punch Controller PCB is faulty. 3. The Finisher Controller PCB is faulty. 4. The host machine DC Controller PCB is faulty.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie