• Code: E227-0004
• Description: Power supply (24V) error
  24V port is OFF when loading.
• Remedy: 1. Connector disconnection/open circuit of the Reader Power Supply. 2. Failure of power supply.

• Code: E227-0101
• Description: Power supply (24V) error
  24V port is OFF when the power of DADF is turned ON.
• Remedy: 1. Connection error between the DADF Driver PCB (PCB1) and the Reader Controller PCB (PCB1). 2. Connector disconnection/open circuit of the Reader Power Supply. 3. Failure of power supply.

• Code: E227-0102
• Description: Power supply (24V) error
  24V port is OFF when a job is started in the DADF.
• Remedy: 1. Connection error between the DADF Driver PCB (PCB1) and the Reader Controller PCB (PCB1). 2. Connector disconnection/open circuit of the Reader Power Supply. 3. Failure of power supply.

• Code: E227-0103
• Description: Power supply (24V) error
  24V port is OFF when a job is ended in the DADF.
• Remedy: 1. Connection error between the DADF Driver PCB (PCB1) and the Reader Controller PCB (PCB1). 2. Connector disconnection/open circuit of the Reader Power Supply. 3. Failure of power supply.

• Code: E240-0000
• Description: Communication error between Main Controller and DC Controller
  Communication error occurs between the CPU of the Main Controller PCB and the DC Controller PCB (PCB1).
• Remedy: 1. Check the connection of the Main Controller PCB and the DC Controller PCB (PCB1). Main Controller side: J712, DC Controller side: J442 2. Replace the DC Controller PCB (PCB1). 3. Replace the Main Controller PCB.

• Code: E240-0001
• Description: 3 minutes passed with pickup request waiting status
  It was detected that 3 minutes passed with pickup request waiting status.
• Remedy: 1. Check the connection of the Connector. 2. Check the connection of the Sub PCB in the Main Controller PCB 1 Box. 3. Check the connections of the DC Controller PCB and the Main Controller PCB 1. Replace the PCB(s) if necessary.

• Code: E240-0002
• Description: 3 minutes passed with image output request waiting status
  It was detected that 3 minutes passed with image output request waiting status.
• Remedy: 1. Check the connection of the Connector. 2. Check the connection of the Sub PCB in the Main Controller PCB 1 Box. 3. Check the connections of the DC Controller PCB and the Main Controller PCB 1. Replace the PCB(s) if necessary.

• Code: E240-0003
• Description: Software sequence error after the jam
  A software sequence error (engine bug) was detected after the jam.?
• Remedy: 1. Check the connection of the Connector. 2. Check the connection of the Sub PCB in the Main Controller PCB 1 Box. 3. Check the connections of the DC Controller PCB and the Main Controller PCB 1. Replace the PCB(s) if necessary.