• Code: E197-0181
• Description: Serial communication error
  Failure of reception from the video signal control ASIC. Data reception was failed 5 times in a row when reading data from the video signal control ASIC (at FG lock detection, BD lock detection).
• Remedy: Replace the DC Controller PCB (PCB1).

• Code: E202-0001
• Description: Scanner HP error
  An error occurs during the Scanner Unit (Paper Front) HP detection operation (outward).
• Remedy: 1. Connector disconnection/open circuit of the Scanner HP Sensor (SR2). 2. Failure of the Scanner HP Sensor (SR2). 3. Failure of the Scanner Motor (M1). 4. Failure of the Reader Controller PCB (PCB1).

• Code: E202-0002
• Description: Scanner HP error
  An error occurs during the Scanner Unit (Paper Front) HP detection operation (homeward).
• Remedy: 1. Connector disconnection/open circuit of the Scanner HP Sensor (SR2). 2. Failure of the Scanner HP Sensor (SR2). 3. Failure of the Scanner Motor (M1). 4. Failure of the Reader Controller PCB (PCB1).

• Code: E202-0101
• Description: Glass HP error
  An error occurs during the Glass HP detection operation (outward).
• Remedy: 1. Connector disconnection/open circuit of the Glass Shift HP Sensor (SR11). 2. Failure of the Glass Shift HP Sensor (SR11). 3. Failure of the Glass Shift Motor (M9). 4. Failure of the DADF Driver PCB (PCB1).

• Code: E202-0102
• Description: Glass HP error
  An error occurs during the Glass HP detection operation (homeward).
• Remedy: 1. Connector disconnection/open circuit of the Glass Shift HP Sensor (SR11). 2. Failure of the Glass Shift HP Sensor (SR11). 3. Failure of the Glass Shift Motor (M9). 4. Failure of the DADF Driver PCB (PCB1).

• Code: E227-0001
• Description: Power supply (24V) error
  24V port is OFF when the power is turned ON.B
• Remedy: 1. Connector disconnection/open circuit of the Reader Power Supply. 2. Failure of power supply.

• Code: E227-0002
• Description: Power supply (24V) error
  24V port is OFF when a job is started.
• Remedy: 1. Connector disconnection/open circuit of the Reader Power Supply. 2. Failure of power supply.

• Code: E227-0003
• Description: Power supply (24V) error
  24V port is OFF when a job is ended.
• Remedy: 1. Connector disconnection/open circuit of the Reader Power Supply. 2. Failure of power supply