Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon iR Advance 6265 — Trang 37/40

Code: E748-2021

Description: Main controller board 2 access errors
Remedy: Main controller board 1/2 removing and inserting, replacement

Code: E748-2023

Description: Main controller board 2 access errors
Remedy: DDR2-SDRAM (M0/M1/P) removing and inserting, replacement

Code: E748-2024

Description: Main controller board 2 access errors
Remedy: Main controller board 1/2 removing and inserting, replacement

Code: E748-4910

Description: Main Controller PCB 2 error
Remedy: Replace the Main Controller PCB 2.

Code: E748-9000

Description: System error
Remedy: Contact to the sales companies

Code: E753-0001

Description: Download error
Firmware update error.
Remedy: Turn OFF and then ON the power.

Code: E753-0001

Description: Download Error
System Software Update Error Error occurs when updating system software of uninstalled options
Remedy: Check the log to find where the download error has been occurred. FIN_E1 Staple Finisher-E1/Booklet Finisher-E1 G3CCB Super G3 FAX Board-AF1/Super G3 2nd Line Fax Board-AF1/Super G3 3rd/4th Line Fax Board-AE1 G3CCM Super G3 FAX Board-AF1/Super G3 2nd Line Fax Board-AF1/Super G3 3rd/4th Line Fax Board-AE1 When any of the above system software is displayed, check if the target option has been installed. When the target option has not been installed: Turn OFF and then ON the main power supply to restore (since there is no system software to be updated.). When the target option has been installed: Check if the accessory is correctly installed and if the target system software to be downloaded is for the installed option. Then download the appropriate system software again.

Code: E804-0000

Description: Power Supply Cooling Fan 1/2 error
The Fan stop signal is detected for 5 seconds or longer and retry is failed 4 times in a row although the Power Supply Cooling Fan 1 (FM14)/Power Supply Cooling Fan 2 (FM15) is turned ON. The error detection signal cable is shared with the Fans, and it is not detected with which Fan the error occurs.
Remedy: 1. Check the connection of the Connector. 2. Replace the Power Supply Cooling Fan 1 (FM14)/Power Supply Cooling Fan 2 (FM15).
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie