Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon iR Advance 6575i — Trang 66/76

Code: 719-0001-00

Description: Coin vendor error
Causes: The coin vendor which was connected before turning OFF the main power was not connected at power-on.
Remedy: Check/replace the cable between the charging management equipment and the host machine. [Reference] When operating the machine without the charging management equipment, execute "COPIER> FUNCTION> CLEAR> ERR". (It is designed to generate an error to prevent the misuse by removing the charging management equipment.)

Code: 719-0002-00

Description: Coin vendor error
Causes: IPC error when the coin vendor is running - Open circuit of the IPC, or IPC communication could not be recovered. - Open circuit of the pickup/delivery signal cable was detected. - Invalid connection was detected.
Remedy: Check/replace the cable between the charging management equipment and the host machine. [Reference] When operating the machine without the charging management equipment, execute "COPIER> FUNCTION> CLEAR> ERR". (It is designed to generate an error to prevent the misuse by removing the charging management equipment.)

Code: 719-0003-00

Description: Coin vendor error
Causes: A communication error with the coin vendor was detected during unit price acquisition at startup.
Remedy: Check/replace the cable between the charging management equipment and the host machine. [Reference] When operating the machine without the charging management equipment, execute "COPIER> FUNCTION> CLEAR> ERR". (It is designed to generate an error to prevent the misuse by removing the charging management equipment.)

Code: 719-0031-00

Description: Card Reader communication error
Causes: Communication with the Card Reader could not be established at startup.
Remedy: Perform the following in the order while checking whether the error is cleared. 1. Check/replace the harness between the Card Reader and the Main Controller PCB (PWB1/ J4023 (white connector at the upper side). 2. Replace the Card Reader. [Reference] In the case of operating the device without the Card Reader which had been used, execute "COPIER> FUNCTION> CLEAR> CARD" after removing the Card Reader.

Code: 719-0032-00

Description: Card Reader communication error
Causes: Although communication with the Card Reader was available at startup, it became unavailable in the middle of it.
Remedy: Perform the following in the order while checking whether the error is cleared. 1. Check/replace the harness between the Card Reader and the Main Controller PCB (PWB1/ J4023 (white connector at the upper side). 2. Replace the Card Reader. [Reference] In the case of operating the device without the Card Reader which had been used, execute "COPIER> FUNCTION> CLEAR> CARD" after removing the Card Reader.

Code: 720-0001-05

Description: Error due to non-compatible Finisher
Causes: A finisher not supported by the host machine has been connected.
Remedy: Connect the finisher (STAPLE FIN-V1/BOOKLET FIN-V1) for this model.

Code: 720-0002-05

Description: Error due to non-compatible option deck
Causes: An option deck not supported by the host machine has been connected.
Remedy: Connect the option deck (POD DECK LITE-C1/PAPER DECK UNIT-E1) for this model.

Code: 720-0400-05

Description: Error due to non-compatible Finisher
Causes: A finisher not supported by the host machine has been connected.
Remedy: Connect the finisher (STAPLE FIN-V1/BOOKLET FIN-V1) for this model.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie