Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon iR Advance 8095 Pro — Trang 36/54

Code: E602-0001

Description: Hard disk error. HDD detection error. Unable to detect HDD, not become Ready, return an error. Error, the system of the host machine has not been started normally. Therefore the error code is not recorded in the log.
Remedy: 1. Connection of the HDD cable. 2. Reinstall the system. 3. HDD. 4. Main Controller PCB.

Code: E602-0002

Description: Hard disk error. There is no startup file. There is no program for main CPU in /BOOTDEV/BOOT/ on HDD. Error, the system of the host machine has not been started normally. Therefore the error code is not recorded in the log.
Remedy: 1. Reinstall the system. 2. HDD.

Code: E602-0003

Description: Hard disk error. HDD WriteAbort error. Unable to read /BOOTDEV sector on HDD.
Remedy: 1. Reinstall the system. 2. HDD.

Code: E602-0006

Description: Hard disk error. There is no SubBootable for the PDL type in /BOOTDEV/ BOOT. Error, the system of the host machine has not been started normally. Therefore the error code is not recorded in the log.
Remedy: 1. Reinstall the system. 2. HDD.

Code: E602-0009

Description: Hard disk error. There is no FONT file which is required when executing report print, FAX/IFAX transmission and reception, or stamp print in /BOOTDEV/BOOT.
Remedy: 1. Reinstall the system. 2. HDD.

Code: E602-0012

Description: Hard disk error. The file on HDD in which the Web browser refers to is corrupted or deleted.
Remedy: 1. Reinstall the system. 2. HDD.

Code: E602-0100

Description: Hard disk error. Error in /FSTDEV.
Remedy: 1. Check the Cable and Power Connector. 2. If the measures above do not solve the problem, start up in Safe Mode to perform All Format using SST and reinstall the system (SYSTEM, LANGUAGE, RUI), and then turn OFF and then ON the main power. 3. If the error still remains, it can be caused by HDD failure; therefore, replace the HDD and reinstall the system.

Code: E602-0101

Description: Hard disk error. Error in /FSTDEV.
Remedy: 1. Check the Cable and Power Connector. 2. If the measures above do not solve the problem, start up in Safe Mode to perform All Format using SST and reinstall the system (SYSTEM, LANGUAGE, RUI), and then turn OFF and then ON the main power. 3. If the error still remains, it can be caused by HDD failure; therefore, replace the HDD and reinstall the system.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie