Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon iR Advance 8095 Pro — Trang 13/54

Code: E247-0003

Description: System error
Remedy: Contact to the sales companies.

Code: E247-0004

Description: System error
Remedy: Contact to the sales companies.

Code: E248-0000

Description: SRAM error. SRAM check error when the power is turned ON.
Remedy: Main Controller PCB 2.

Code: E248-0001

Description: EEPROM error. An error when EEPROM power for the Reader Controller PCB (PCB1) is turned ON.
Remedy: Failure of the Reader Controller PCB (PCB1).

Code: E248-0002

Description: EEPROM error. EEPROM writing error for the Reader Controller PCB (PCB1).
Remedy: Failure of the Reader Controller PCB (PCB1).

Code: E248-0003

Description: EEPROM error. Reading error after writing to EEPROM for the Reader Controller PCB (PCB1).
Remedy: Failure of the Reader Controller PCB (PCB1).

Code: E263-0000

Description: Error in Current Sensor reference voltage generation. The reference voltage is not within the range of reference value.
Remedy: 1. Check the connection between the AC Driver PCB and the Main Driver PCB (connector disconnection, open circuit, short circuit of harness). AC Driver side: J615, Main Driver side: J103 2. Replace the AC Driver PCB. 3. Replace the Main Driver PCB (PCB2).

Code: E263-0001

Description: Current Sensor error. An error is detected in the value of the Current Sensor (SE601) (the value remains at the upper limit).
Remedy: 1. Check the connection between the AC Driver PCB and the Main Driver PCB (connector disconnection, open circuit, short circuit of harness). AC Driver side: J615, Main Driver side: J103 2. Replace the AC Driver PCB. 3. Replace the Main Driver PCB (PCB2).
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie