• Code: E197-0011
• Description: Error in Developing High Voltage PCB connection detection. Connection between the Main Driver PCB (PCB2) and the Developing High Voltage PCB (PCB12) is disconnected.
• Remedy: 1. Check the connection between the Main Driver PCB (PCB2) and the Developing High Voltage PCB (PCB12). Main Driver side: J112, Developing High Voltage side: J3511 2. Replace the Developing High Voltage PCB (PCB12).

• Code: E197-0012
• Description: Error in Transfer High Voltage PCB connection detection. Connection between the Duplex Driver PCB (PCB4) and the Transfer High Voltage PCB (PCB13) is disconnected.
• Remedy: 1. Check the connection between the Duplex Driver PCB (PCB4) and the Transfer High Voltage PCB (PCB13). Duplex Driver side: J343, Transfer High Voltage side: J3062 2. Replace the Transfer High Voltage PCB (PCB13).

• Code: E197-0181
• Description: Serial communication error. Failure of reception from the video signal control ASIC. Data reception was failed 5 times in a row when reading data from the video signal control ASIC (at FG lock detection, BD lock detection).
• Remedy: Replace the DC Controller PCB (PCB1).

• Code: E202-0001
• Description: Scanner HP error. An error occurs during the Scanner Unit (Paper Front) HP detection operation (outward).
• Remedy: 1. Connector disconnection/open circuit of the Scanner HP Sensor (SR2). 2. Failure of the Scanner HP Sensor (SR2). 3. Failure of the Scanner Motor (M1). 4. Failure of the Reader Controller PCB (PCB1).

• Code: E202-0002
• Description: Scanner HP error. An error occurs during the Scanner Unit (Paper Front) HP detection operation (homeward).
• Remedy: 1. Connector disconnection/open circuit of the Scanner HP Sensor (SR2). 2. Failure of the Scanner HP Sensor (SR2). 3. Failure of the Scanner Motor (M1). 4. Failure of the Reader Controller PCB (PCB1).

• Code: E202-0101
• Description: Glass HP error. An error occurs during the Glass HP detection operation (outward).
• Remedy: 1. Connector disconnection/open circuit of the Glass Shift HP Sensor (SR11). 2. Failure of the Glass Shift HP Sensor (SR11). 3. Failure of the Glass Shift Motor (M9). 4. Failure of the DADF Driver PCB (PCB1).

• Code: E202-0102
• Description: Glass HP error. An error occurs during the Glass HP detection operation (homeward).
• Remedy: 1. Connector disconnection/open circuit of the Glass Shift HP Sensor (SR11). 2. Failure of the Glass Shift HP Sensor (SR11). 3. Failure of the Glass Shift Motor (M9). 4. Failure of the DADF Driver PCB (PCB1).

• Code: E227-0001
• Description: Power supply (24V) error. 24V port is OFF when the power is turned ON.
• Remedy: 1. Connector disconnection/open circuit of the Reader Power Supply. 2. Failure of power supply.