Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon iR Advance 8295 Pro — Trang 25/54

Code: E535-0001

Description: Error in the Swing Guide Motor (Finisher-D1). The swing guide does not come off the Swing Guide HP Sensor when the Swing Guide Motor has been driven for 3 seconds.
Remedy: 1. The connector of the Swing Guide HP Sensor (S110) or the Swing Guide Motor (M110) are disconnected. 2. The wiring of the Swing Guide HP Sensor (S110) or the Swing Guide Motor (M110) are faulty. 3. The Swing Guide HP Sensor (S110) is faulty. 4. The Swing Guide Motor (M110) is faulty. 5. The Finisher Controller PCB is faulty.

Code: E535-0002

Description: Error in the Swing Guide Motor (Finisher-D1). The Swing Guide HP Sensor does not detect the swing guide when the Swing Guide Motor has been driven for 3 seconds.
Remedy: 1. The connector of the Swing Guide HP Sensor (S110) or the Swing Guide Motor (M110) are disconnected. 2. The wiring of the Swing Guide HP Sensor (S110) or the Swing Guide Motor (M110) are faulty. 3. The Swing Guide HP Sensor (S110) is faulty. 4. The Swing Guide Motor (M110) is faulty. 5. The Finisher Controller PCB is faulty.

Code: E535-0003

Description: Error in the Swing Guide Motor (Finisher-D1). The Swing Guide Height Detection Sensor failed to be ON even though specified period of time has passed when lowering the swing guide.
Remedy: 1. The connector of the Swing Guide Height Detection Sensor (S118) or the Swing Guide Motor (M110) are disconnected. 2. The wiring of the Swing Guide Height Detection Sensor (S118) or the Swing Guide Motor (M110) are faulty. 3. The Swing Guide Height Detection Sensor (S118) is faulty. 4. The Swing Guide Motor (M110) is faulty. 5. The Finisher Controller PCB is faulty.

Code: E535-0004

Description: Error in the Swing Guide Motor (Finisher-D1). The Swing Guide Height Detection Sensor failed to be OFF even though specified period of time has passed when raising the swing unit.
Remedy: 1. The connector of the Swing Guide Height Detection Sensor (S118) or the Swing Guide Motor (M110) are disconnected. 2. The wiring of the Swing Guide Height Detection Sensor (S118) or the Swing Guide Motor (M110) are faulty. 3. The Swing Guide Height Detection Sensor (S118) is faulty. 4. The Swing Guide Motor (M110) is faulty. 5. The Finisher Controller PCB is faulty.

Code: E537-8001

Description: Error in the Rear Alignment Motor (Finisher-D1). The rear alignment plate does not come off the Rear Alignment HP Sensor when the Rear Alignment Motor has been driven for 4 seconds.
Remedy: 1. The connector of the Rear Alignment HP Sensor (S109) or the Rear Alignment Motor (M109) are disconnected. 2. The wiring of the Rear Alignment HP Sensor (S109) or the Rear Alignment Motor (M109) are faulty. 3. The Rear Alignment HP Sensor (S109) is faulty. 4. The Rear Alignment Motor (M109) is faulty. 5. The Finisher Controller PCB is faulty.

Code: E537-8002

Description: Error in the Rear Alignment Motor (Finisher-D1). The Rear Alignment HP Sensor does not detect the rear alignment plate when the Rear Alignment Motor has been driven for 4 seconds.
Remedy: 1. The connector of the Rear Alignment HP Sensor (S109) or the Rear Alignment Motor (M109) are disconnected. 2. The wiring of the Rear Alignment HP Sensor (S109) or the Rear Alignment Motor (M109) are faulty. 3. The Rear Alignment HP Sensor (S109) is faulty. 4. The Rear Alignment Motor (M109) is faulty. 5. The Finisher Controller PCB is faulty.

Code: E540-8001

Description: Tray 1 time out error (Finisher-D1). 1. The tray 1 does not return to home position when the Tray 1 Shift Motor has been driven for 20 seconds. 2. The tray 1 does not come off the Tray 1 Area Sensor at the same area when the Tray 1 Shift Motor has been driven for 4 seconds.
Remedy: 1. The connectors of the Tray 1 Area Sensors (S122/S123/ S124) or the Tray 1 Shift Motor (M105) are disconnected. 2. The wiring of the Tray 1 Area Sensors (S122/S123/S124) or the Tray 1 Shift Motor (M105) are faulty. 3. The Tray 1 Area Sensors (S122/S123/S124) is faulty. 4. The Tray 1 Shift Motor (M105) is faulty. 5. The Finisher Controller PCB is faulty.

Code: E540-8002

Description: Tray 1 area error (Finisher-D1). The tray 1 detects the discontinuous area with the Tray 1 Area Sensors.
Remedy: 1. The connectors of the Tray 1 Area Sensors (S122/S123/ S124) or the Tray 1 Shift Motor (M105) are disconnected. 2. The wiring of the Tray 1 Area Sensors (S122/S123/S124) or the Tray 1 Shift Motor (M105) are faulty. 3. The Tray 1 Area Sensors (S122/S123/S124) is faulty. 4. The Tray 1 Shift Motor (M105) is faulty. 5. The Finisher Controller PCB is faulty.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie