• Code: E315-0100
• Description: Image process device error
  PRIO overrun
• Remedy: 1. Turn OFF and then ON the main power 2. Check connection of Main Controller PCB 2 3. Replace Main Controller PCB 2

• Code: E315-0500
• Description: Device timeout
  An image synchronous signal from the Main Controller PCB 2 to the Reader is not received within 30 seconds.
• Remedy: 1. Turn OFF and then ON the main power. 2. Check the connection of the Main Controller PCB 2 (including the flat cable). 3. Replace the flat cable. 4. Replace the Main Controller PCB 2.

• Code: E315-0501
• Description: Device abnormal completion
  An abnormal signal from the Main Controller PCB 2 to the Reader is detected.
• Remedy: 1. Turn OFF and then ON the main power. 2. Check the connection of the Main Controller PCB 2 (including the flat cable). 3. Replace the flat cable. 4. Replace the Main Controller PCB 2.

• Code: E315-0510
• Description: Device timeout
  An image synchronous signal from the Main Controller PCB 2 to the Reader is not received within 30 seconds.
• Remedy: 1. Turn OFF and then ON the main power. 2. Check the connection of the Main Controller PCB 2 (including the flat cable). 3. Replace the flat cable. 4. Replace the Main Controller PCB 2.

• Code: E315-0511
• Description: Device abnormal completion
  An abnormal signal from the Main Controller PCB 2 to the Reader is detected.
• Remedy: 1. Turn OFF and then ON the main power. 2. Check the connection of the Main Controller PCB 2 (including the flat cable). 3. Replace the flat cable. 4. Replace the Main Controller PCB 2.

• Code: E315-0520
• Description: Device timeout
  An image synchronous signal from the Main Controller PCB 2 to the Reader is not received within 30 seconds.
• Remedy: 1. Turn OFF and then ON the main power. 2. Check the connection of the Main Controller PCB 2 (including the flat cable). 3. Replace the flat cable. 4. Replace the Main Controller PCB 2.

• Code: E315-0521
• Description: Device abnormal completion
  An abnormal signal from the Main Controller PCB 2 to the Reader is detected.
• Remedy: 1. Turn OFF and then ON the main power. 2. Check the connection of the Main Controller PCB 2 (including the flat cable). 3. Replace the flat cable. 4. Replace the Main Controller PCB 2.

• Code: E315-0530
• Description: Device timeout
  An image synchronous signal from the Main Controller PCB 2 to the Reader is not received within 30 seconds.
• Remedy: 1. Turn OFF and then ON the main power. 2. Check the connection of the Main Controller PCB 2 (including the flat cable). 3. Replace the flat cable. 4. Replace the Main Controller PCB 2.