Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon iR Advance C2030H — Trang 24/45

Code: E315-0531

Description: Device abnormal completion
An abnormal signal from the Main Controller PCB 2 to the Reader is detected.
Remedy: 1. Turn OFF and then ON the main power. 2. Check the connection of the Main Controller PCB 2 (including the flat cable). 3. Replace the flat cable. 4. Replace the Main Controller PCB 2.

Code: E315-0540

Description: Device timeout
An image synchronous signal from the Main Controller PCB 2 to the Reader is not received within 30 seconds.
Remedy: 1. Turn OFF and then ON the main power. 2. Check the connection of the Main Controller PCB 2 (including the flat cable). 3. Replace the flat cable. 4. Replace the Main Controller PCB 2.

Code: E315-0541

Description: Device abnormal completion
An abnormal signal from the Main Controller PCB 2 to the Reader is detected.
Remedy: 1. Turn OFF and then ON the main power. 2. Check the connection of the Main Controller PCB 2 (including the flat cable). 3. Replace the flat cable. 4. Replace the Main Controller PCB 2.

Code: E315-0550

Description: Device timeout
An image synchronous signal from the Main Controller PCB 2 to the Reader is not received within 30 seconds.
Remedy: 1. Turn OFF and then ON the main power. 2. Check the connection of the Main Controller PCB 2 (including the flat cable). 3. Replace the flat cable. 4. Replace the Main Controller PCB 2.

Code: E315-0551

Description: Device abnormal completion
An abnormal signal from the Main Controller PCB 2 to the Reader is detected.
Remedy: 1. Turn OFF and then ON the main power. 2. Check the connection of the Main Controller PCB 2 (including the flat cable). 3. Replace the flat cable. 4. Replace the Main Controller PCB 2.

Code: E350

Description: System error
Remedy: Contact the service company office

Code: E351-0000

Description: Main Controller PCB 2 communication error
Remedy: 1. Turn OFF and then ON the main power 2. Disconnect and then connect the connector of the Main Controller PCB 2. 3. Replace the Main Controller PCB 2.

Code: E354

Description: System error
Remedy: Contact the service company office
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie