Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon iR Advance C2220 — Trang 45/45

Code: E808-0002

Description: Zero cross signal detection error
Unable to detect 43 to 57Hz for 500 msec or longer after confirmation of a zero cross cycle
Remedy: Electrical trouble with failed zero cross signal 1. Check failure between the AC Driver PCB (UN14/ J122) and the DC Controller PCB (UN09/ J10). (trapped cable, open circuit, connector disconnection) -> Replace the part in the case of trapped cable/open circuit 2. Replace the AC Driver PCB (UN14) 3. Replace the DC Controller PCB (UN09) 4. Check the power supply condition at the customer site. When it is below 43 to 57Hz, ask for a construction work.

Code: E880-0001

Description: Controller Fan error
Lock of Controller Fan is detected
Remedy: Check if the connector is connected If the connector is OK, replace Controller Fan (FM3)

Code: E996-0071

Description: Frequent error avoidance jam (ADF)
Remedy: Depending on the setting of JM-ERR-R in service mode, “010071” jam is displayed as an error. Collect log and contact to the sales companies. To cancel the setting, select COPIER> OPTION> FNC-SW> J M-ERR-R, and set JM-ERR-R to 0.

Code: E996-0CA1

Description: Frequent error avoidance jam (PRINTER)
Remedy: Make “000CA1” jam to be displayed as an error by setting M-ERR-D in service mode. Collect log and contact to the sales companies. To cancel the setting, select COPIER> OPTION> FNC-SW> J M-ERR-D, and set JM-ERR-D to 0.

Code: E996-0CA2

Description: Frequent error avoidance jam (PRINTER)
Remedy: Make “000CA2” jam to be displayed as an error by setting M-ERR-D in service mode. Collect log and contact to the sales companies. To cancel the setting, select COPIER> OPTION> FNC-SW> J M-ERR-D, and set JM-ERR-D to 0.

Code: E996-0CA3

Description: Frequent error avoidance jam (PRINTER)
Remedy: Make “000CA3” jam to be displayed as an error by setting M-ERR-D in service mode. Collect log and contact to the sales companies. To cancel the setting, select COPIER> OPTION> FNC-SW> J M-ERR-D, and set JM-ERR-D to 0.

Code: E996-0CF1

Description: Frequent error avoidance jam (PRINTER)
Remedy: Make “000CF1” jam to be displayed as an error by setting M-ERR-D in service mode. Collect log and contact to the sales companies. To cancel the setting, select COPIER> OPTION> FNC-SW> J M-ERR-D, and set JM-ERR-D to 0.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie