Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon iR Advance C2220i — Trang 22/45

Code: E302-0001

Description: Error in paper front white shading
Error in shading RAM access The shading value is out of the specified range.
Remedy: 1. Check that the LED of the Scanner Unit (Paper Front) is lit. 2. Check the connection between Scanner Unit (Paper Front) and LED, and check that the Cable is not open-circuit. 3. Check the connection between Reader Controller PCB and Scanner Unit (Paper Front), and check that the Cable is not open-circuit. 4. Check the condition of Shading White Plate of the Stream Read Glass (Paper Front) (scratches, dust, soil, etc.). 5. Check if Scanner Unit (Paper Front) detects HP correctly. (If it does not detect correctly, the Scanner Unit reaches to the end when DF is opened.) 6. Replace the Scanner Unit (Paper Front). 7. Replace the Reader Controller PCB.

Code: E302-0002

Description: Error in paper front black shading
Error in shading RAM access The shading value is out of the specified range.
Remedy: 1. Check that the LED of the Scanner Unit (Paper Front) is lit. 2. Check the connection between Scanner Unit (Paper Front) and LED, and check that the Cable is not open-circuit. 3. Check the condition of Shading White Plate of the Stream Read Glass (Paper Front) (scratches, dust, soil, etc.). 4. Check if Scanner Unit (Paper Front) detects HP correctly. (If it does not detect correctly, the Scanner Unit reaches to the end when DF is opened.) 5. Replace the Scanner Unit (Paper Front). 6. Replace the Reader Controller PCB.

Code: E315-0007

Description: Image process device error
JBIG encode error
Remedy: 1. Turn OFF and then ON the main power 2. Check connection of Main Controller PCB 2 3. Replace Main Controller PCB 2

Code: E315-000d

Description: Image process device error
JBIG decode error
Remedy: 1. Delete the current job 2. Turn OFF and then ON the main power 3. Check connection of Main Controller PCB 2 4. Replace the DDR-SDRAM, the HDD and Main Controller PCB 2 at the same time

Code: E315-000e

Description: Image process device error
Error at software decoding
Remedy: 1. Delete the current job 2. Turn OFF and then ON the main power 3. Check connection of Main Controller PCB 2 4. Replace the DDR-SDRAM, the HDD and Main Controller PCB 2 at the same time

Code: E315-000f

Description: Image process device error
Error at MemoryCopy
Remedy: 1. Turn OFF and then ON the main power 2. Check connection of Main Controller PCB 2 3. Replace Main Controller PCB 2

Code: E315-0027

Description: Image process device error
ROTU timeout error
Remedy: 1. Turn OFF and then ON the main power 2. Check connection of Main Controller PCB 2 3. Replace Main Controller PCB 2

Code: E315-0035

Description: Image process device error
MemFill timeout error
Remedy: 1. Turn OFF and then ON the main power 2. Check connection of Main Controller PCB 2 3. Replace Main Controller PCB 2
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie