Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon iR Advance C355i — Trang 27/44

Code: E602-5002-00

Description: HDD error
Causes: A non-genuine HDD was detected.
Remedy: 1. Replace the HDD with a genuine one. 2. Format the HDD and reinstall the system software using SST or a USB flash drive.

Code: E602-FF01-00

Description: HDD error
Causes: An unidentified HDD error was detected at startup. When this error occurs, the system has not been started normally. Therefore, it may not be recorded in the error log.
Remedy: [Related parts] R1.00 - Harness between the Main Controller PCB (UN81/J6003, J6004) and the HDD - HDD - Main Controller PCB (UN81) [Remedy] Perform the following in the order while checking whether the error is cleared. 1. Check the related harness/cable and connector. 2. Format the HDD and reinstall the system software using SST or a USB flash drive. 3. Check/replace the related parts. [Reference] For backup and restoration, refer to "Adjustment> Main Controller System" and "Appendix> Backup Data List" in the Service Manual.

Code: E602-FF11-00

Description: HDD error
Causes: An unidentified HDD error was detected after startup.
Remedy: [Related parts] R1.00 - Harness between the Main Controller PCB (UN81/J6003, J6004) and the HDD - HDD - Main Controller PCB (UN81) [Remedy] Perform the following in the order while checking whether the error is cleared. 1. Check the related harness/cable and connector. 2. Format the HDD and reinstall the system software using SST or a USB flash drive. 3. Check/replace the related parts. [Reference] For backup and restoration, refer to "Adjustment> Main Controller System" and "Appendix> Backup Data List" in the Service Manual.

Code: E604-1024-00

Description: Faulty/insufficient image memory
Causes: No necessary memory at Main Controller PCB
Remedy: Make the Memory capacity at Main Controller PCB as indicated by 1024.

Code: E604-1536-00

Description: Faulty/insufficient image memory
Causes: No necessary memory at Main Controller PCB
Remedy: Make the Memory capacity at Main Controller PCB as indicated by 1536.

Code: E613-0512-00

Description: Faulty/insufficient image memory
Causes: No necessary memory at Main Controller PCB
Remedy: Make the Memory capacity at Main Controller PC as indicated by 0512.

Code: E613-1024-00

Description: Faulty/insufficient image memory
Causes: No necessary memory at Main Controller PCB
Remedy: Make the Memory capacity at Main Controller PCB as indicated by 1024.

Code: E613-1536-00

Description: Faulty/insufficient image memory
Causes: No necessary memory at Main Controller PCB
Remedy: Make the Memory capacity at Main Controller PCB as indicated by 1536.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie