• Code: E100-0100
• Description: BD error of YM-side Scanner
  Description Failure in detection of BD signal even though the specified period of time has passed when Laser Scanner Unit 1 (YM laser) is started or making prints.
• Remedy: 1. Turn OFF and then ON the power. 2. Check the connector of Laser Scanner Unit 1 3. Replace Laser Scanner Unit 1.

• Code: E100-0300
• Description: BD error of CBk-side Scanner
  Failure in detection of BD signal even though the specified period of time has passed when Laser Scanner Unit 2 (CBk laser) is started or making prints.
• Remedy: 1. Turn OFF and then ON the power. 2. Check the connector of Laser Scanner Unit 2. 3. Replace Laser Scanner Unit 2.

• Code: E100-B000
• Description: BD cycle error
  When the BD cycle count value is not within the specified range.
• Remedy: 1. Turn OFF and then ON the power. 2. Check connection of harness on the Laser Scanner Unit. 3. Replace the Laser Scanner Unit. 4. Replace the DC Controller PCB (UN1). 5. Replace the harness.

• Code: E102-0101
• Description: Faulty EEPROM of YM-side Scanner
  In the case of an error in reading EEPROM in the Laser Driver (YM) or in the case of a wrong Laser Scanner Unit which does not match with the Host Machine.
• Remedy: 1. Turn OFF and then ON the power. 2. Check the connector of the Laser Scanner Unit 1 3. Replace the Laser Scanner Unit 1.

• Code: E102-0301
• Description: Faulty EEPROM of CBk-side Scanner
  In the case of an error in reading EEPROM of the Laser Driver (CBk), in the case of failure in reading the correct information (laser, etc.) from EEPROM, or in the case of a wrong Laser Scanner which does not match with the Host Machine.
• Remedy: 1. Turn OFF and then ON the power. 2. Check the connector of Laser Scanner Unit 2. 3. Replace Laser Scanner Unit 2.

• Code: E103-0001
• Description: With the Laser Scanners at YM side and CK side, the laser driver IDs were different
  The model IDs were different between the YM side and CK side when reading the model ID from EEPROM. (Detection is performed only with iR-ADVC5255, and C5250.)
• Remedy: Check the parts number of the Laser Scanner Unit. Replace the Laser Scanner Unit to make the following combinations. YM side: For iR-ADVC5255 and C5250, CK side: For iRADVC5255 and C5250 (recommended) YM side: For iR-ADVC5051 and C5045, CK side: For iR-ADVC5051 and C5045 (operates normally but not recommended)

• Code: E110-0100
• Description: Error in Polygon Motor of YM-side Scanner (BD lock failed)
  In the case of failure in detecting FG signal although the specified period of time has passed after the Scanner Motor of Laser Scanner Unit 1 (YM laser) was started.
• Remedy: 1. Check the connector of Laser Scanner Unit 1. 2. Replace Laser Scanner Unit 1.

• Code: E110-0101
• Description: Error in Polygon Motor of YM-side Scanner (unreached speed)
  In the case of failure in detecting FG signal while the Scanner Motor of Laser Scanner Unit 1 (YM laser) is stably rotating.
• Remedy: 1. Turn OFF and then ON the power. 2. Check the connector of Laser Scanner Unit 1 3. Replace Laser Scanner Unit 1.