Remedy: 1. Disconnect and then connect the connectors (J107 and J109) on the DC Controller PCB (UN1). 2. Disconnect and then connect the connectors (J311 and J313) on the Drum Driver PCB (UN4). 3. Check that 3.3V power is supplied to the Drum Driver PCB (UN4). 4. Replace the Drum Driver PCB (UN4). 5. Replace the DC Controller PCB (UN1).
Remedy: 1. Disconnect and then connect the connectors (J103 and J106) on the DC Controller PCB (UN1). 2. Disconnect and then connect the connectors (J201 and J202) on the Cassette Feed Driver PCB (UN3). 3. Check that 3.3V power is supplied to the Cassette Feed Driver PCB (UN3). 4. Replace the Cassette Feed Driver PCB (UN3). 5. Replace the DC Controller PCB (UN1).
Remedy: 1. Disconnect and then connect the connector (J110) on the DC Controller PCB (UN1). 2. Disconnect and then connect the connectors (J653 and 654) on the HVT1 PCB (UN16). 3. Check that 3.3V power is supplied to the HVT1 PCB (UN16). 4. Replace the HVT1 PCB (UN16). 5. Replace the DC Controller PCB (UN1).
Description: Scanner HP error
Scanner Unit error when moving to the left side for HP check operation
Remedy: 1. Turn OFF and then ON the power. 2. Check the drive of Scanner Motor. (Open the DF Unit to check the operation of Motor.) 3. Check the flag position of Scanner Home Position Sensor and Scanner Unit. 4. Replace the Reader Controller PCB.
Description: Scanner HP error
Scanner Unit error when moving to the right side for HP check operation
Remedy: 1. Turn OFF and then ON the power. 2. Check the drive of Scanner Motor. (Open the DF Unit to check the operation of Motor.) 3. Check the flag position of Scanner Home Position Sensor and Scanner Unit. 4. Replace the Reader Controller PCB.
Description: Glass HP error (This error occurs on Duplex Color Image Reader Unit-B1 only)
Glass error when moving to the left side for HP check operation
Remedy: 1. Turn OFF and then ON the power. 2. Check the drive of Glass Shifting Motor. (Set the service mode: FEEDER > FUNCTION > MTR-CHK > 7. Then, set FEEDER > FUNCTION > MTR-ON.) 3. Check the flag position of Scanner Home Position Sensor and Scanner Unit. 4. Replace the Reader Controller PCB.
Description: Glass HP error (This error occurs on Duplex Color Image Reader Unit-B1 only)
Glass error when moving to the right side for HP check operation
Remedy: 1. Turn OFF and then ON the power. 2. Check the drive of Glass Shifting Motor. (Set the service mode: FEEDER > FUNCTION > MTR-CHK > 7. Then, set FEEDER > FUNCTION > MTR-ON.) 3. Check the flag position of Scanner Home Position Sensor and Scanner Unit. 4. Replace the Reader Controller PCB.
Description: Power supply (24V) error
24V port error when the power is turned ON
Remedy: 1. Turn OFF and then ON the power. 2. Check the connection between Reader and Printer, and check that the Cable is not open-circuit. 3. Check the 24V port of the Reader Controller PCB and DF Driver PCB. 4. Check the power supply and Relay PCB on the Printer side. 5. Replace the Reader Controller PCB and DF Driver PCB.
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.