Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon iR Advance C5035F — Trang 32/56

Code: E500-0000

Description: Communication error
Communication between the controller of the connected device and the Finisher Controller is suspended.
Remedy: 1. The finisher controller PCB is faulty. 2. The host machine DC Controller PCB (UN1) is faulty.

Code: E500-0001

Description: Communication error
Communication between the controller of the connected device and the Finisher Controller is suspended.
Remedy: 1. The finisher controller PCB is faulty. 2. The host machine DC Controller PCB (UN1) is faulty.

Code: E503-0002

Description: Communication error
Communication between the Saddle Controller and the Finisher Controller is suspended.
Remedy: 1. The wiring between the finisher controller PCB and saddle controller PCB is faulty. 2. The finisher controller PCB is faulty. 3. The saddle stitcher controller PCB is faulty.

Code: E503-0003

Description: Communication error
Communication between the Punch Controller and the Finisher Controller is suspended.
Remedy: 1. The wiring between the finisher controller PCB and host machine DC Controller PCB (UN1) is faulty. 2. The punch controller PCB is faulty. 3. The finisher controller PCB is faulty. 4. The host machine DC Controller PCB (UN1) is faulty.

Code: E505-0001

Description: EEPROM error
The checksum for the finisher controller EEPROM data has an error.
Remedy: Failure of Finisher Controller PCB.

Code: E505-0002

Description: EEPROM error
The checksum for the punch controller EEPROM data has an error.
Remedy: 1. Failure of Punch Controller PCB.

Code: E509-0001

Description: The combination error of the host machine and finisher
The unconformed finisher is equipped with the host machine.
Remedy: 1. The miss-combination of the host machine and finisher 2. The finisher controller PCB is fault. 3. The host machine controller PCB is faulty.

Code: E514-8001

Description: Rear end assist home position error
The stapler does not leave the rear end assist home position when the rear end assist motor has been driven for 3 seconds.
Remedy: 1. The rear end assist home position sensor (PI109) is faulty. 2. The wiring between the finisher controller PCB and rear end assist motor is faulty. 3. The end assist mechanism is faulty. 4. The rear end assist motor (M109) is faulty. 5. The finisher controller PCB is faulty.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie