Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon iR Advance C5035F — Trang 49/56

Code: E731-3015

Description: Error in Main Controller PCB 2
Video data is not transmitted to CL1-G even though there is no problem in the software.
Remedy: 1. Turn OFF and then ON the power. 2. Replace the Main Controller PCB 2. 3. Replace the Main Controller PCB 1.

Code: E732-0001

Description: Error in scanner communication
Error in DDI-S communication
Remedy: 1. Check the connector connecting to the Scanner. 2. Check the power of the Scanner ->whether to perform initialization at start-up? 3. Replace the Rcon, the Scanner Board or the Main controller PCB 2.

Code: E732-0021

Description: Error in scanner communication
Error in DDI-S communication
Remedy: 1. Check the connector connecting to the Scanner. 2. Check the power of the Scanner ->whether to perform initialization at start-up? 3. Replace the Rcon, the Scanner Board or the Main controller PCB 2.

Code: E732-0021

Description: Error in scanner communication
Error in DDI-S communication
Remedy: 1. Check the connector connecting to the Scanner. 2. Check the power of the Scanner ->whether to perform initialization at start-up? 3. Replace the Rcon, the Scanner Board or the Main controller PCB 2.

Code: E732-8888

Description: ADF setting error
ADF which was not the one set in service mode was detected.
Remedy: Turn OFF and then ON the power. At restart, select COPIER> OPTION> CUSTOM> SCANTYPE, and change the setting to the setting of ADF which is currently installed.

Code: E733-0000

Description: Error in printer communication
Communication with the printer failed at start-up.
Remedy: 1. Check the connector connecting to the Printer. 2. Check the power of the Printer -> whether to perform initialization at start-up? 3. Replace the Dcon or the Main controller PCB 2.

Code: E733-0001

Description: Error in printer communication
Error in DDI-P communicatione
Remedy: 1. Check the connector connecting to the Printer. 2. Check the power of the Printer -> whether to perform initialization at start-up? 3. Replace the Dcon or the Main Controller PCB 2.

Code: E733-0002

Description: Error in printer communication
Error in DDI-P communication
Remedy: 1. Check the connector connecting to the Printer. 2. Check the power of the Printer -> whether to perform initialization at start-up? 3. Replace the Dcon or the Main Controller PCB 2.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie