• Code: E677-0010
• Description: Failure in Print Server
  Failure was detected in operation of the CPU fan on the print server.
• Remedy: 1. Replace the board of the print server. 2. Reinstall the Print Server

• Code: E677-0080
• Description: Failure in Print Server
  Error is detected at the Mother Board check when print server is started.
• Remedy: 1. Check the cable connection and turn OFF and then ON the power. 2. Reenter the job. 3. Reinstall the print server.

• Code: E710-0001
• Description: Error in initialization of IPC (Ctrl)
  Failed to be at ready status within 3 sec after IPC chip has been started.
• Remedy: Check the connection between DC Controller PCB and Finisher, and check that the Cable is not open-circuit.

• Code: E711-0001
• Description: Error in register of IPC (Ctrl)
  Set 4 errors within 1.5 sec in register IPC chip.
• Remedy: Check the cable.

• Code: E711-0002
• Description: Error in IPC communication
  Initial communication error with the Finisher
• Remedy: Check the connector connected to the Finisher.

• Code: E713-0001
• Description: Error in IPC communication
  When receiving retransmission request for 3 times in a row.
• Remedy: Check the connector connected to the Finisher.

• Code: E713-0002
• Description: Error in IPC communication
  When detecting CRC error at transmission.
• Remedy: Check the connector connected to the Finisher.

• Code: E713-0004
• Description: Error in IPC communication
  When not receiving data for more than specified time
• Remedy: Check the connector connected to the Finisher.