• Code: E593-8001
• Description: A. Error in the punch slide motor(Finisher-A1) B. Horizontal registration home position error(External * Hole Puncher). A. The punch unit does not come off the horizontal registration HP sensor when the punch slide motor has been driven for 680msec. B. At time of horizontal registration motor initialization, the punch slide unit does not leave the horizontal home position sensor even when it has been driven for 9 mm.
• Remedy: A: 1. The connector of the horizontal registration HP sensor (S101) or the punch slide motor (M101) are disconnected. 2. The wiring of the horizontal registration HP sensor (S101) or the punch slide motor (M101) are faulty. 3. The horizontal registration HP sensor (S101) is faulty. 4. The punch slide motor (M101) is faulty. 5. The puncher driver PCB (PCB1) is faulty. 6. The finisher controller PCB is faulty. B: 1) The horizontal registration home position (PI61) is faulty. 2) The wiring between the punch controller PCB and sensor is faulty. 3) The horizontal registration mechanism is faulty. 4) The horizontal registration motor (M62) is faulty. 5) The punch cont

• Code: E593-8002
• Description: A. Error in the punch slide motor(Finisher-A1) B. Horizontal registration home position error(External * Hole Puncher). A. The horizontal registration HP sensor does not detect the punch unit when the punch slide motor has been driven for 3.3sec. B. At time of horizontal registration motor initialization, the punch slide unit does not return to the horizontal registration home position sensor even when the unit has been driven for 37 mm.
• Remedy: A: 1. The connector of the horizontal registration HP sensor (S101) or the punch slide motor (M101) are disconnected. 2. The wiring of the horizontal registration HP sensor (S101) or the punch slide motor (M101) are faulty. 3. The horizontal registration HP sensor (S101) is faulty. 4. The punch slide motor (M101) is faulty. 5. The puncher driver PCB (PCB1) is faulty. 6. The finisher controller PCB is faulty. B: 1) The horizontal registration home position (PI61) is faulty. 2) The wiring between the punch controller PCB and sensor is faulty. 3) The horizontal registration mechanism is faulty. 4) The horizontal registration motor (M62) is faulty. 5) The punch controller PCB is faulty. 6) The finisher controller PCB is faulty.

• Code: E5A3-0001
• Description: Error in the registration motor(Finisher-A1). The registration HP sensor does not turn ON when the registration motor has been driven for 2.933sec.
• Remedy: 1. The connector of the registration HP sensor (S105) or the registration motor (M102) are disconnected. 2. The wiring of the registration HP sensor (S105) or the registration motor (M102) are faulty. 3. The registration HP sensor (S105) is faulty. 4. The registration motor (M102) is faulty. 5. The trimmer controller PCB (PCB1) is faulty.

• Code: E5A3-0002
• Description: Error in the registration motor(Finisher-A1). The registration HP sensor does not turn OFF when the registration motor has been driven for 670msec.
• Remedy: 1. The connector of the registration HP sensor (S105) or the registration motor (M102) are disconnected. 2. The wiring of the registration HP sensor (S105) or the registration motor (M102) are faulty. 3. The registration HP sensor (S105) is faulty. 4. The registration motor (M102) is faulty. 5. The trimmer controller PCB (PCB1) is faulty.

• Code: E5A4-8001
• Description: Error in the press motor(Finisher-A1). The press motor HP sensor does not turn ON when the press motor has been driven for 926msec.
• Remedy: 1. The connector of the press motor HP sensor (S106) or the press motor (M105) are disconnected. 2. The wiring of the press motor HP sensor (S106) or the press motor (M105) are faulty. 3. The press motor HP sensor (S106) is faulty. 4. The press motor (M105) is faulty. 5. The trimmer controller PCB (PCB1) is faulty.

• Code: E5A4-8002
• Description: Error in the press motor(Finisher-A1). The press motor HP sensor does not turn OFF when the press motor has been driven for 601msec.
• Remedy: 1. The connector of the press motor HP sensor (S106) or the press motor (M105) are disconnected. 2. The wiring of the press motor HP sensor (S106) or the press motor (M105) are faulty. 3. The press motor HP sensor (S106) is faulty. 4. The press motor (M105) is faulty. 5. The trimmer controller PCB (PCB1) is faulty.

• Code: E5AA-8001
• Description: Error in the cutter motor(Finisher-A1). The home position of the trimming blade is not detected when the cutter motor has been driven for 5sec.
• Remedy: 1. The connector of the cutter motor clock sensor (S108) or the cutter motor (M106) are disconnected. 2. The wiring of the cutter motor clock sensor (S108) or the cutter motor (M106) are faulty. 3. The cutter motor clock sensor (S108) is faulty. 4. The cutter motor (M106) is faulty. 5. The trimmer controller PCB (PCB1) is faulty.

• Code: E5AA-8002
• Description: Error in the cutter motor(Finisher-A1). The cutter motor clock sensor does not come off the home position of the trimming blade when the cutter motor has been driven for 500msec
• Remedy: 1. The connector of the cutter motor clock sensor (S108) or the cutter motor (M106) are disconnected. 2. The wiring of the cutter motor clock sensor (S108) or the cutter motor (M106) are faulty. 3. The cutter motor clock sensor (S108) is faulty. 4. The cutter motor (M106) is faulty. 5. The trimmer controller PCB (PCB1) is faulty.