Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon iR Advance C7270 — Trang 33/75

Code: E260-0001

Description: Power supply (24VA) error. 24V power (+24VA) was not supplied.
Remedy: 1. Connector disconnection/open circuit of harness with the corresponding PCB. Check connectors and harnesses between the following: AC Driver PCB, Relay PCB, DC Power Supply PCB (24VA). 2. Failure of PCB. Replace the following: AC Driver PCB, Relay PCB, DC Power Supply PCB (24VA).

Code: E260-0002

Description: Power supply (24VB) error. 24V power (+24VB) was not supplied.
Remedy: 1. Connector disconnection/open circuit of harness with the corresponding PCB. Check connectors and harnesses between the following: AC Driver PCB, Relay PCB, DC Power Supply PCB (24VB). 2. Failure of PCB. Replace the following: AC Driver PCB, Relay PCB, DC Power Supply PCB (24VB).

Code: E260-0003

Description: DC Controller PCB 5V error. An error in the 5V output from the DC Controller PCB was detected.
Remedy: Replace the DC Controller PCB.

Code: E270-0001

Description: Failure of the front side vertical direction synchronization signal. The vertical direction synchronization signal (VSYNC) was not sent from the CMOS PCB (front side optical unit) correctly, and an image failure occurred or the operation stopped in failure.
Remedy: 1. Displacement/disconnection of the connector of the optical unit (reader) 2. Displacement/disconnection of the connector of the reader controller PCB (PCB1) 3. Failure of the optical unit (reader) 4. Failure of the reader controller PCB

Code: E270-0002

Description: Failure of the horizontal/vertical direction synchronization signal. The vertical direction synchronization signal (VSYNC) was not sent due to a failure of the horizontal direction synchronization signal (HSYNC), and an image failure occurred or the operation stopped in failure.
Remedy: 1. Displacement/disconnection of the connector of the optical unit (reader/DADF) 2. Displacement/disconnection of the connector of the reader controller PCB (PCB1) 3. Failure of the optical unit (reader/DADF) 4. Failure of the reader controller PCB

Code: E270-0101

Description: Failure of the backside vertical scanning direction synchronization signal. The vertical direction synchronization signal (VSYNC) was not sent from the CMOS PCB (backside optical unit) correctly, and an image failure occurred or the operation stopped in failure.
Remedy: 1. Displacement/disconnection of the connector of the optical unit (DADF) 2. Displacement/disconnection of the connector of the reader controller PCB (PCB1) 3. Failure of the optical unit (DADF) 4. Failure of the reader controller PCB

Code: E280-0001

Description: Communication error between Reader Controller PCB (PCB1) and Scanner Unit (Paper Front) (Reader). Within the specified period of time, communication between the Reader Controller PCB and Scanner Unit (Paper Front) was not started.
Remedy: 1. Connector disconnection/open circuit of the Scanner Unit (Paper Front) (Reader). ?¨ Connect the connector/ Replace the harness. 2. Connector disconnection/open circuit of the Reader Controller PCB (PCB1). ?¨ Connect the connector/ Replace the harness. 3. Replace the Scanner Unit (Reader). 4. Replace the Reader Controller PCB.

Code: E280-0002

Description: Harness disconnection between Reader Controller PCB (PCB1) and Scanner Unit (Paper Front) (Reader). Harness disconnection between Reader Controller PCB (PCB1) and Scanner Unit (Paper Front) (Reader).
Remedy: 1. Connector disconnection/open circuit of the Scanner Unit (Paper Front) (Reader). ?¨ Connect the connector/ Replace the harness. 2. Connector disconnection/open circuit of the Reader Controller PCB (PCB1). ?¨ Connect the connector/ Replace the harness.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie