Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon iR Advance C7270 — Trang 42/75

Code: E532-8002

Description: A. Error in the stapler shift motor (Finisher-K1) B. Stapler shift home position error (Finisher-L1). A. The stapler shift HP sensor does not detect the staple unit when the staple shift motor has been driven for 5 seconds. B. The stapler does not leave the stapler shift home position when the stapler shift motor has been driven for 5 seconds.
Remedy: A: A-1. The connector of the stapler shift HP sensor (S107) or the staple shift motor (M107) are disconnected. A-2. The wiring of the stapler shift HP sensor or the staple shift motor are faulty. A-3. The stapler shift HP sensor is faulty. A-4. The staple shift motor is faulty. A-5. The finisher controller PCB is faulty. B: B-1. The stapler drive home position sensor (PI110) is faulty. B-2. The wiring between the finisher controller PCB and stapler shift motor is faulty. B-3. The stapler shift base is faulty. B-4. The stapler shift motor (M105) is faulty. B-5. The finisher controller

Code: E535-0001

Description: Error in the swing guide motor (Finisher-K1). The swing guide does not come off the swing guide HP sensor when the swing guide motor has been driven for 3 seconds.
Remedy: 1. The connector of the swing guide HP sensor (S110) or the swing guide motor (M110) are disconnected. 2. The wiring of the swing guide HP sensor or the swing guide motor are faulty. 3. The swing guide HP sensor is faulty. 4. The swing guide motor is faulty. 5. The finisher controller PCB is faulty.

Code: E535-0002

Description: Error in the swing guide motor (Finisher-K1). The swing guide HP sensor does not detect the swing guide when the swing guide motor has been driven for 3 seconds.
Remedy: 1. The connector of the swing guide HP sensor (S110) or the swing guide motor (M110) are disconnected. 2. The wiring of the swing guide HP sensor or the swing guide motor are faulty. 3. The swing guide HP sensor is faulty. 4. The swing guide motor is faulty. 5. The finisher controller PCB is faulty.

Code: E535-0003

Description: Error in the swing guide motor (Finisher-K1). The swing guide height detection sensor failed to be ON even though specified period of time has passed when lowering the swing guide.
Remedy: 1. The connector of the swing guide height detection sensor (S118) or the swing guide motor (M110) are disconnected. 2. The wiring of the swing guide height detection sensor or the swing guide motor are faulty. 3. The swing guide height detection sensor is faulty. 4. The swing guide motor is faulty. 5. The finisher controller PCB is faulty.

Code: E535-0004

Description: Error in the swing guide motor (Finisher-K1). The swing guide height detection sensor failed to be OFF even though specified period of time has passed when raising the swing unit.
Remedy: 1. The connector of the swing guide height detection sensor (S118) or the swing guide motor (M110) are disconnected. 2. The wiring of the swing guide height detection sensor or the swing guide motor are faulty. 3. The swing guide height detection sensor is faulty. 4. The swing guide motor is faulty. 5. The finisher controller PCB is faulty.

Code: E535-8001

Description: Swing home position error (Finisher-L1). The stapler does not leave the swing home position when the swing motor has been driven for 3 seconds.
Remedy: 1. The swing home position sensor (PI105) is faulty. 2. The wiring between the finisher controller PCB and swing motor is faulty. 3. The swing mechanism is faulty. 4. The swing motor (M106) is faulty. 5. The finisher controller PCB is faulty.

Code: E535-8002

Description: Swing home position error (Finisher-L1). The stapler does not return to the swing home position when the swing motor has bee driven for 3 seconds.
Remedy: 1. The swing home position sensor (PI105) is faulty. 2. The wiring between the finisher controller PCB and swing motor is faulty. 3. The swing mechanism is faulty. 4. The swing motor (M106) is faulty. 5. The finisher controller PCB is faulty.

Code: E537-8001

Description: A. Error in the rear alignment motor (Finisher-K1) B. Rear aligning plate home position error (Finisher-L1). A. The rear alignment plate does not come off the rear alignment HP sensor when the rear alignment motor has been driven for 4 seconds. B. The aligning plate does not leave the aligning plate rear home position sensor when the alignment plate rear motor has been driven for 4 seconds.
Remedy: A: A-1. The connector of the rear alignment HP sensor (S109) or the rear alignment motor (M109) are disconnected. A-2. The wiring of the rear alignment HP sensor or the rear alignment motor are faulty. A-3. The rear alignment HP sensor is faulty. A-4. The rear alignment motor is faulty. A-5. The finisher controller PCB is faulty. B: B-1. The aligning plate rear home position sensor (PI107) is faulty. B-2. The wiring between the finisher controller PCB and aligning plate rear motor is faulty. B-3. The rear aligning plate is faulty. B-4. The rear aligning plate motor (M104) is faulty. B-5. The finisher controller PCB is faulty.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie