0

Các lỗi thường gặp

Code :
  • Code: E100-0101
  • Description: Laser scanner motor BD (Y) error. The laser scanner motor cannot detect the VLOCK signal and PLOCK signal during BD rotation.
  • Remedy: 1. Check that the cover is closed. 2. Check connection of the following parts: Relay PCB, DC Controller PCB, Laser Power Supply Relay PCB (UN101), and Laser Interface PCB (UN100) (connector connection, open circuit, the caught cable). Relay PCB: J1817, DC Controller PCB: J1200, J1201, Laser Power Supply Relay PCB: J5600, J5601, Laser Interface PCB: J5500 3. Check connection between the Laser Scanner Unit and Laser Interface PCB (connector connection/open circuit/the caught cable). Laser Scanner Unit: J8070, J5509, Laser Interface PCB: J5101Y 4. Replace the Laser Scanner Unit. 5. Replace the Laser Interface PCB. 6. Replace the Laser Power Supply Relay PCB.
  • Code: E100-0201
  • Description: Laser scanner motor BD (M) error. The laser scanner motor cannot detect the VLOCK signal and PLOCK signal during BD rotation.
  • Remedy: 1. Check that the cover is closed. 2. Check connection of the following parts: Relay PCB, DC Controller PCB, Laser Power Supply Relay PCB (UN101), and Laser Interface PCB (UN100) (connector connection, open circuit, the caught cable). Relay PCB: J1817, DC Controller PCB: J1200, J1201, Laser Power Supply Relay PCB: J5600, J5601, Laser Interface PCB: J5500 3. Check connection between the Laser Scanner Unit and Laser Interface PCB (connector connection/open circuit/the caught cable). Laser Scanner Unit: J8076, J5510, Laser Interface PCB: J5101M 4. Replace the Laser Scanner Unit. 5. Replace the Laser Interface PCB. 6. Replace the Laser Power Supply Relay PCB.
  • Code: E100-0301
  • Description: Laser scanner motor BD (C) error. The laser scanner motor cannot detect the VLOCK signal and PLOCK signal during BD rotation.
  • Remedy: 1. Check that the cover is closed. 2. Check connection of the following parts: Relay PCB, DC Controller PCB, Laser Power Supply Relay PCB (UN101), and Laser Interface PCB (UN100) (connector connection, open circuit, the caught cable). Relay PCB: J1817, DC Controller PCB: J1200, J1201, Laser Power Supply Relay PCB: J5600, J5601, Laser Interface PCB: J5500 3. Check connection between the Laser Scanner Unit and Laser Interface PCB (connector connection/open circuit/the caught cable). Laser Scanner Unit: J8064, J5511, Laser Interface PCB: J5101C 4. Replace the Laser Scanner Unit. 5. Replace the Laser Interface PCB. 6. Replace the Laser Power Supply Relay PCB.
  • Code: E100-0401
  • Description: Laser scanner motor BD (Bk) error. The laser scanner motor cannot detect the VLOCK signal and PLOCK signal during BD rotation
  • Remedy: 1. Check that the cover is closed. 2. Check connection of the following parts: Relay PCB, DC Controller PCB, Laser Power Supply Relay PCB (UN101), and Laser Interface PCB (UN100) (connector connection, open circuit, the caught cable). Relay PCB: J1817, DC Controller PCB: J1200, J1201, Laser Power Supply Relay PCB: J5600, J5601, Laser Interface PCB: J5500 3. Check connection between the Laser Scanner Unit and Laser Interface PCB (connector connection/open circuit/the caught cable). Laser Scanner Unit: J8066, J5512, Laser Interface PCB: J5101K 4. Replace the Laser Scanner Unit. 5. Replace the Laser Interface PCB. 6. Replace the Laser Power Supply Relay PCB.
  • Code: E102-0101
  • Description: Laser scanner unit (Y) EEPROM error. Laser scanner unit EEPROM failure / Failure of the data written in the laser scanner unit EEPROM was detected
  • Remedy: 1. Check that the cover is closed. 2. Check connection of the following parts: Relay PCB, DC Controller PCB, Laser Power Supply Relay PCB (UN101), and Laser Interface PCB (UN100) (connector connection, open circuit, the caught cable). Relay PCB: J1817, DC Controller PCB: J1200, J1201, Laser Power Supply Relay PCB: J5600, J5601, Laser Interface PCB: J5500 3. Check connection between the Laser Scanner Unit and Laser Interface PCB (connector connection/open circuit/the caught cable). Laser Scanner Unit: J8070, J5509, Laser Interface PCB: J5101Y 4. Replace the Laser Scanner Unit. 5. Replace the Laser Interface PCB. 6. Replace the Laser Power Supply Relay PCB.
  • Code: E102-0201
  • Description: Laser scanner unit (M) EEPROM error. Laser scanner unit EEPROM failure / Failure of the data written in the laser scanner unit EEPROM was detected.
  • Remedy: 1. Check that the cover is closed. 2. Check connection of the following parts: Relay PCB, DC Controller PCB, Laser Power Supply Relay PCB (UN101), and Laser Interface PCB (UN100) (connector connection, open circuit, the caught cable). Relay PCB: J1817, DC Controller PCB: J1200, J1201, Laser Power Supply Relay PCB: J5600, J5601, Laser Interface PCB: J5500 3. Check connection between the Laser Scanner Unit and Laser Interface PCB (connector connection/open circuit/the caught cable). Laser Scanner Unit: J8076, J5510, Laser Interface PCB: J5101M 4. Replace the Laser Scanner Unit. 5. Replace the Laser Interface PCB. 6. Replace the Laser Power Supply Relay PCB.
  • Code: E102-0301
  • Description: Laser scanner unit (C) EEPROM error. Laser scanner unit EEPROM failure / Failure of the data written in the laser scanner unit EEPROM was detected
  • Remedy: 1. Check that the cover is closed. 2. Check connection of the following parts: Relay PCB, DC Controller PCB, Laser Power Supply Relay PCB (UN101), and Laser Interface PCB (UN100) (connector connection, open circuit, the caught cable). Relay PCB: J1817, DC Controller PCB: J1200, J1201, Laser Power Supply Relay PCB: J5600, J5601, Laser Interface PCB: J5500 3. Check connection between the Laser Scanner Unit and Laser Interface PCB (connector connection/open circuit/the caught cable). Laser Scanner Unit: J8064, J5511, Laser Interface PCB: J5101C 4. Replace the Laser Scanner Unit. 5. Replace the Laser Interface PCB. 6. Replace the Laser Power Supply Relay PCB
  • Code: E102-0401
  • Description: Laser scanner unit (Bk) EEPROM error. Laser scanner unit EEPROM failure / Failure of the data written in the laser scanner unit EEPROM was detected.
  • Remedy: 1. Check that the cover is closed. 2. Check connection of the following parts: Relay PCB, DC Controller PCB, Laser Power Supply Relay PCB (UN101), and Laser Interface PCB (UN100) (connector connection, open circuit, the caught cable). Relay PCB: J1817, DC Controller PCB: J1200, J1201, Laser Power Supply Relay PCB: J5600, J5601, Laser Interface PCB: J5500 3. Check connection between the Laser Scanner Unit and Laser Interface PCB (connector connection/open circuit/the caught cable). Laser Scanner Unit: J8066, J5512, Laser Interface PCB: J5101K 4. Replace the Laser Scanner Unit. 5. Replace the Laser Interface PCB. 6. Replace the Laser Power Supply Relay PCB.
‹ First  < 21 22 23 24 25 26 27 >  Last ›
Thêm vào giỏ hàng thành công
popup

Số lượng:

Tổng tiền:

Danh mục