Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon iR Advance C7570i — Trang 26/112

Code: 197-3008-05

Description: Serial communication error
Causes: A communication error between the DC Controller PCB and the Developing High Voltage PCB (CL) was detected.
Remedy: [Related parts] R1.00 - Harness between the DC Controller PCB (UN2/J1254) and the Developing High Voltage PCB (CL) (UN40/J3045) - Developing High Voltage PCB (CL) (UN40) - DC Controller PCB (UN2) [Remedy] Check/replace the related harness/cable, connector and parts. [Reference] Before replacing the DC Controller PCB, back up the service mode data (approx. 2 min) and restore the backup data after the replacement so the data may be able to be protected. - Backup: COPIER (LEVEL2)> FUNCTION> SYSTEM> DSRAMBUP - Restoration: COPIER (LEVEL2)> FUNCTION> SYSTEM> DSRAMRES

Code: 197-3009-05

Description: Serial communication error
Causes: A communication error between the DC Controller PCB and the Buffer Driver PCB was detected.
Remedy: [Related parts] R1.00 - Harness between the DC Controller PCB (UN2/J1226) and the Buffer Driver PCB (UN98/J2102) - Buffer Driver PCB (UN98) - DC Controller PCB (UN2) [Remedy] Check/replace the related harness/cable, connector and parts. [Reference] Before replacing the DC Controller PCB, back up the service mode data (approx. 2 min) and restore the backup data after the replacement so the data may be able to be protected. - Backup: COPIER (LEVEL2)> FUNCTION> SYSTEM> DSRAMBUP - Restoration: COPIER (LEVEL2)> FUNCTION> SYSTEM> DSRAMRES

Code: 197-300A-05

Description: Serial communication error
Causes: A communication error between the DC Controller PCB and the Developing Assembly Control PCB was detected.
Remedy: [Related parts] R1.00 - Harness between the DC Controller PCB (UN2/J1252) and the Developing Assembly Control PCB (UN96/J1308) - Developing Assembly Control PCB (UN96) - DC Controller PCB (UN2) [Remedy] Check/replace the related harness/cable, connector and parts. [Reference] Before replacing the DC Controller PCB, back up the service mode data (approx. 2 min) and restore the backup data after the replacement so the data may be able to be protected. - Backup: COPIER (LEVEL2)> FUNCTION> SYSTEM> DSRAMBUP - Restoration: COPIER (LEVEL2)> FUNCTION> SYSTEM> DSRAMRES

Code: 197-300B-05

Description: Serial communication error
Causes: A communication error in the DC Controller PCB was detected.
Remedy: Check/replace the DC Controller PCB (UN2). [Reference] Before replacing the DC Controller PCB, back up the service mode data (approx. 2 min) and restore the backup data after the replacement so the data may be able to be protected. - Backup: COPIER (LEVEL2)> FUNCTION> SYSTEM> DSRAMBUP - Restoration: COPIER (LEVEL2)> FUNCTION> SYSTEM> DSRAMRES

Code: 197-5001-05

Description: Serial communication error
Causes: A communication error between the DC Controller PCB and the Laser Interface PCB was detected. (Detection at the DC Controller PCB side)
Remedy: [Related parts] R1.00 - Harnesses between the DC Controller PCB (UN2/J1220 and J1221) and the Laser Interface PCB (UN106/J10 and J16) - Laser Interface PCB (UN106) - DC Controller PCB (UN2) [Remedy] Check/replace the related harness/cable, connector and parts. [Reference] Before replacing the DC Controller PCB, back up the service mode data (approx. 2 min) and restore the backup data after the replacement so the data may be able to be protected. - Backup: COPIER (LEVEL2)> FUNCTION> SYSTEM> DSRAMBUP - Restoration: COPIER (LEVEL2)> FUNCTION> SYSTEM> DSRAMRES

Code: 197-5002-05

Description: Serial communication error
Causes: A communication error between the DC Controller PCB and the Laser Interface PCB was detected. (Detection at the Laser Interface PCB side)
Remedy: [Related parts] R1.00 - Harnesses between the DC Controller PCB (UN2/J1220 and J1221) and the Laser Interface PCB (UN106/J10 and J16) - Laser Interface PCB (UN106) - DC Controller PCB (UN2) [Remedy] Check/replace the related harness/cable, connector and parts. [Reference] Before replacing the DC Controller PCB, back up the service mode data (approx. 2 min) and restore the backup data after the replacement so the data may be able to be protected. - Backup: COPIER (LEVEL2)> FUNCTION> SYSTEM> DSRAMBUP - Restoration: COPIER (LEVEL2)> FUNCTION> SYSTEM> DSRAMRES

Code: 197-5004-05

Description: Serial communication error
Causes: A communication error between the Laser Interface PCB and the Riser PCB was detected.
Remedy: [Related parts] R1.00 - Harnesses between the Laser Interface PCB (UN106/J73 and J74) and the Riser PCB (UN159/ J71 and J72) - Laser Interface PCB (UN106) - Riser PCB (UN159) [Remedy] Check/replace the related harness/cable, connector and parts.

Code: 197-5103-05

Description: Serial communication error
Causes: A communication error between the Laser Interface PCB and the Laser Driver PCB (Y) was detected.
Remedy: [Related parts] R1.00 - FFC between the Laser Interface PCB (UN106/J2 and J3) and the Laser Driver PCB (Y) (UN107/ J1 and J2) - Laser Scanner Unit (Y) - Laser Driver PCB (Y) (UN107) - Laser Interface PCB (UN106) [Remedy] Check/replace the related harness/cable, connector and parts.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie