Description: Laser scanner motor (M) error. The laser scanner motor cannot detect the VLOCK signal during FG rotation.
Remedy: 1. Check the connection of the relay PCB (J1817), laser power relay PCB (J5600/5601), and laser interface PCB (J5500). (Connection of the connector, Shorting, Wire caught by parts) 2. Check the connection between the laser scanner unit (J8076/8074/J5101M) and the laser interface PCB (J5510). (Connection of the connector, Shorting, Wire caught by parts) 3. Replace the laser scanner unit. 4. Replace the laser interface PCB. 5. Replace the laser power relay PCB.
Description: Laser scanner motor (C) error. The laser scanner motor cannot detect the VLOCK signal during FG rotation.
Remedy: 1. Check the connection of the relay PCB (J1817), laser power relay PCB (J5600/5601), and laser interface PCB (J5500). (Connection of the connector, Shorting, Wire caught by parts) 2. Check the connection between the laser scanner unit (J8064/8069/J5101C) and the laser interface PCB (J5511). (Connection of the connector, Shorting, Wire caught by parts) 3. Replace the laser scanner unit. 4. Replace the laser interface PCB. 5. Replace the laser power relay PCB.
Description: Laser scanner motor (Bk) error. The laser scanner motor cannot detect the VLOCK signal during FG rotation.
Remedy: 1. Check the connection of the relay PCB (J1817), laser power relay PCB (J5600/5601), and laser interface PCB (J5500). (Connection of the connector, Shorting, Wire caught by parts) 2. Check the connection between the laser scanner unit (J8066/8069/J5101K) and the laser interface PCB (J5512). (Connection of the connector, Shorting, Wire caught by parts) 3. Replace the laser scanner unit. 4. Replace the laser interface PCB. 5. Replace the laser power relay PCB.
Description: Scanner home position error. Failure of detection of the home position of the optical unit for front side (outward)
Remedy: 1. Turn OFF and then ON the power. 2. Check the drive of Scanner Motor. (Open the DF Unit to check the operation.) 3. Check the flag position of Scanner Home Position Sensor and Scanner Unit. 4. Replace the Reader Controller PCB.
Description: Scanner home position error. Failure of detection of the home position of the optical unit for front side (homeward)
Remedy: 1. Turn OFF and then ON the power. 2. Check the drive of Scanner Motor. (Open the DF Unit to check the operation.) 3. Check the flag position of Scanner Home Position Sensor and Scanner Unit. 4. Replace the Reader Controller PCB.
Description: Glass home position error. Failure of detection of the glass home position (outward)
Remedy: 1. Turn OFF and then ON the power. 2. Check the drive of Glass Shifting Motor. (Set the service mode: FEEDER > FUNCTION > MTR-CHK > 8. Then, set FEEDER > FUNCTION > MTR-ON.) 3. Check the flag position of Glass Shifting HP Sensor and Reading Glass. 4. Replace the Reader Controller PCB.
Description: Glass home position error. Failure of detection of the glass home position (homeward)
Remedy: 1. Turn OFF and then ON the power. 2. Check the drive of Glass Shifting Motor. (Set the service mode: FEEDER > FUNCTION > MTR-CHK > 8. Then, set FEEDER > FUNCTION > MTR-ON.) 3. Check the flag position of Glass Shifting HP Sensor and Reading Glass. 4. Replace the Reader Controller PCB.
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.