Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon iR Advance C9270 Pro — Trang 40/75

Code: E514-8001

Description: A. Error in the gripper base motor (Finisher-K1) B. Rear end assist home position error (Finisher-L1). A. The gripper does not come off the gripper base rear sensor when the gripper base motor has been driven for 3 seconds. B. The stapler does not leave the rear end assist home position when the rear end assist motor has been driven for 3 seconds.
Remedy: A: A-1. The connector of the gripper base rear sensor (S117) or the gripper base motor (M116) are disconnected. A-2. The wiring of the gripper base rear sensor or the gripper base motor are faulty. A-3. The gripper base rear sensor is faulty. A-4. The gripper base motor is faulty. A-5. The finisher controller PCB is faulty. B: B-1. The rear end assist home position sensor (PI109) is faulty. B-2. The wiring between the finisher controller PCB and rear end assist motor is faulty. B-3. The end assist mechanism is faulty. B-4. The rear end assist motor (M109) is faulty. B-5. The finisher controller PCB is faulty.

Code: E514-8002

Description: A. Error in the gripper base motor (Finisher-K1) B. Rear end assist home position error (Finisher-L1). A. The gripper base rear sensor dose not detect the gripper when the gripper base motor has been driven for 3 seconds. B. The stapler does not return to the rear end assist home position when the rear end assist motor has been driven for 3 seconds.
Remedy: A: A-1. The connector of the gripper base rear sensor (S117) or the gripper base motor (M116) are disconnected. A-2. The wiring of the gripper base rear sensor or the gripper base motor are faulty. A-3. The gripper base rear sensor is faulty. A-4. The gripper base motor is faulty. A-5. The finisher controller PCB is faulty. B: B-1. The rear end assist home position sensor (PI109) is faulty. B-2. The wiring between the finisher controller PCB and rear end assist motor is faulty. B-3. The end assist mechanism is faulty. B-4. The rear end assist motor (M109) is faulty. B-5. The finisher controller PCB is faulty.

Code: E514-8003

Description: Error in the gripper motor (Finisher-A1). The gripper does not come off the gripper HP sensor when the gripper motor has been driven for 3 seconds.
Remedy: 1. The connector of the gripper HP sensor (S140) or the gripper motor (M117) are disconnected. 2. The wiring of the gripper HP sensor) or the gripper motor are faulty. 3. The gripper HP sensor is faulty. 4. The gripper motor is faulty. 5. The finisher controller PCB is faulty.

Code: E514-8004

Description: Error in the gripper motor (Finisher-K1). The gripper HP sensor does not detect the gripper when the gripper motor has been driven for 3 seconds.
Remedy: 1. The connector of the gripper HP sensor (S140) or the gripper motor (M117) are disconnected. 2. The wiring of the gripper HP sensor or the gripper motor are faulty. 3. The gripper HP sensor is faulty. 4. The gripper motor is faulty. 5. The finisher controller PCB is faulty.

Code: E514-8005

Description: Error in the gripper motor (Finisher-K1). The gripper does not come off the position sensor when the gripper motor has been driven for 3 seconds.
Remedy: 1. The connector of the gripper position sensor (S115) or the gripper motor (M117) are disconnected. 2. The wiring of the gripper position sensor or the gripper motor are faulty. 3. The gripper position sensor is faulty. 4. The gripper motor is faulty. 5. The finisher controller PCB is faulty.

Code: E514-8006

Description: Error in the gripper motor (Finisher-K1). The gripper position sensor does not detect the gripper when the gripper motor has been driven for 3 seconds.
Remedy: 1. The connector of the gripper position sensor (S115) or the gripper motor (M117) are disconnected. 2. The wiring of the gripper position sensor or the gripper motor are faulty. 3. The gripper position sensor is faulty. 4. The gripper motor is faulty. 5. The finisher controller PCB is faulty.

Code: E518-8001

Description: Error in folding feed motor lock (Document Insertion Folding Unit/Paper Folding Unit). The fold transport motor (M5/M11) lock signal has been detected for more than the specified period of time.
Remedy: 1. Connector of Folding feed motor (M5/M11) is disconnected. 2. Folding feed motor is faulty.

Code: E519-0002

Description: Gear change home position error (Finisher-L1). The gear change home position sensor does not turn ON when the gear change motor has been driven for 387 pulses.
Remedy: 1. The gear change home position sensor (PI117) is faulty. 2. The wiring between the finisher controller PCB and gear change motor is faulty. 3. The gear change mechanism is faulty. 4. The gear change motor (M110) is faulty. 5. The finisher controller PCB is faulty.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie