Description: Error in the swing guide safety switch. The swing guide safety switch is turned ON while the tray 1 operates.
Remedy: 1. The connector of the swing guide safety switch (front/ rear) (SW102/SW104) or the staple position switch (SW103) are disconnected. 2. The connector of the swing guide solenoid (SL101) or the tray 1 shift motor (M105) are disconnected. 3. The wiring of the swing guide safety switch (front/rear) or the staple position switch are faulty. 4. The wiring of the swing guide solenoid or the tray 1 shift motor are faulty. 5. The swing guide safety switch (front/rear) is faulty. 6. The staple position switch is faulty. 7. The swing guide solenoid is faulty. 8. The tray 1 shift motor is faulty. 9. The finisher controller PCB is faulty.
Description: A. Tray 2 time-out error (Finisher-K1) B. Upper tray time out error (Finisher-L1). A. The tray 2 does not return to home position when the tray 2 shift motor has been driven for 20 seconds. The tray 2 does not come off the tray 2 area sensor at the same area when the tray 2 shift motor has been driven for 4 seconds. B. If the tray does not return to home position when the tray 1 shift motor is driven for 25 seconds. If the tray does not move to other area when tray 2 shift motor is driven for 5 seconds.
Remedy: A: A-1. The connectors of the tray 2 area sensors (S125/ S126/S127) or the tray 2 shift motor (M217) are disconnected. A-2. The wiring of the tray 2 area sensors or the tray 2 shift motor are faulty. A-3. The tray 2 area sensors is faulty. A-4. The tray 2 shift motor is faulty. A-5. The finisher controller PCB is faulty. B: B-1. The tray 2 shift area sensor PCB is faulty. B-2. The wiring between the finisher controller PCB and tray 2 shift motor is faulty. B-3. The tray up/down mechanism is faulty. B-4. The tray 2 shift motor (M105) is faulty. B-5. The finisher controller PCB is faulty.
Description: A. Tray 2 area error (Finisher-K1) B. Upper tray time out error (Finisher-L1). A. The tray 2 does not return to home position when the tray 2 shift motor has been driven for 20 seconds. The tray 2 does not come off the tray 2 area sensor at the same area when the tray 2 shift motor has been driven for 4 seconds. B. The upper limit area is reached before the tray 2 paper surface sensor 1 detects the paper surface during paper surface detection operation. A discontinuous area is detected during tray operation. The area beyond the the tray 2 paper surface sensor 2 is reached before the tray 2 paper surface sensor 2 detects the paper surface during evacuation operation.
Remedy: A: A-1. The connectors of the tray 2 area sensors (S125/ S126/S127) or the tray 2 shift motor (M217) are disconnected. A-2. The wiring of the tray 2 area sensors or the tray 2 shift motor are faulty. A-3. The tray 2 area sensors is faulty. A-4. The tray 2 shift motor is faulty. A-5. The finisher controller PCB is faulty. B: B-1. The tray 2 shift area sensor PCB is faulty. B-2. The wiring between the finisher controller PCB and tray 2 shift motor is faulty. B-3. The tray up/down mechanism is faulty. B-4. The tray 2 shift motor (M108) is faulty. B-5. The finisher controller PCB is faulty.
Description: Error in the tray 1 lower safety switch (Finisher-K1). The tray 1 lower safety switch is turned ON while the tray 2 operates.
Remedy: 1. The connector of the tray 1 lower safety switch (SW110) or the tray 2 shift motor (M217) are disconnected. 2. The wiring of the tray 1 lower safety switch or the tray 2 shift motor are faulty. 3. The tray 1 lower safety switch is faulty. 4. The tray 2 shift motor is faulty. 5. The finisher controller PCB is faulty.
Description: The tray 2 shift motor clock error (Finisher-L1). The FG input cannot be detected when the tray 2 shift motor has been driven for 0.2 second.
Remedy: 1. The Tray 2 shift area sensor PCB is faulty. 2. The wiring between the finisher controller PCB and tray 2 shift motor is faulty. 3. The tray up/down mechanism is faulty. 4. The Tray 2 shift motor (M108) is faulty. 5. The finisher controller PCB is faulty.
Description: The tray 2 shift motor speed error (Finisher-L1). The lock detection signal turns OFF for 200 mseconds after the lock detection signal turned ON 150 mseconds.
Remedy: 1. The tray 2 shift area sensor PCB is faulty. 2. The wiring between the finisher controller PCB and tray 2 shift motor is faulty. 3. The tray up/down mechanism is faulty. 4. The tray 2 shift motor (M108) is faulty. 5. The finisher controller PCB is faulty.
Description: The tray 2 shift motor acceleration error (Finisher-L1). The lock detection signal does not turn ON when the tray 2 shift motor has been driven for 1 second.
Remedy: 1. The tray 2 shift area sensor PCB is faulty. 2. The wiring between the finisher controller PCB and tray 2 shift motor is faulty. 3. The tray up/down mechanism is faulty. 4. The tray 2 shift motor (M108) is faulty. 5. The finisher controller PCB is faulty.
Description: The tray 2 shift motor error (Finisher-L1). The lock detection signal does not turn OFF when the tray 2 shift motor is at a stop.
Remedy: 1. The tray 2 shift area sensor PCB is faulty. 2. The wiring between the finisher controller PCB and tray 2 shift motor is faulty. 3. The tray up/down mechanism is faulty. 4. The tray 2 shift motor (M108) is faulty. 5. The finisher controller PCB is faulty.
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.