• Code: E5A3-0001
• Description: Error in the registration motor (Finisher-K1). The registration HP sensor does not turn ON when the registration motor has been driven for 2.933 seconds.
• Remedy: 1. The connector of the registration HP sensor (S105) or the registration motor (M102) are disconnected. 2. The wiring of the registration HP sensor/the registration motor are faulty. 3. The registration HP sensor is faulty. 4. The registration motor is faulty. 5. The trimmer controller PCB (PCB1) is faulty.

• Code: E5A3-0002
• Description: Error in the registration motor (Finisher-K1). The registration HP sensor does not turn OFF when the registration motor has been driven for 0.67 msecond.
• Remedy: 1. The connector of the registration HP sensor (S105) or the registration motor (M102) are disconnected. 2. The wiring of the registration HP sensor/the registration motor are faulty. 3. The registration HP sensor is faulty. 4. The registration motor is faulty. 5. The trimmer controller PCB (PCB1) is faulty.

• Code: E5A4-8001
• Description: Error in the press motor (Finisher-K1). The press motor HP sensor does not turn ON when the press motor has been driven for 0.926 second.
• Remedy: 1. The connector of the press motor HP sensor (S106) or the press motor (M105) are disconnected. 2. The wiring of the press motor HP sensor/the press motor are faulty. 3. The press motor HP sensor is faulty. 4. The press motor is faulty. 5. The trimmer controller PCB (PCB1) is faulty.

• Code: E5A4-8002
• Description: Error in the press motor (Finisher-K1). The press motor HP sensor does not turn OFF.
• Remedy: 1. The connector of the press motor HP sensor (S106) or the press motor (M105) are disconnected. 2. The wiring of the press motor HP sensor/the press motor are faulty. 3. The press motor HP sensor is faulty. 4. The press motor is faulty. 5. The trimmer controller PCB (PCB1) is faulty.

• Code: E5AA-8001
• Description: Error in the cutter motor (Finisher-K1). The home position of the trimming blade is not detected when the cutter motor has been driven for 5 sec.
• Remedy: 1. The connector of the cutter motor clock sensor (S108) or the cutter motor (M106) are disconnected. 2. The wiring of the cutter motor clock sensor/the cutter motor are faulty. 3. The cutter motor clock sensor is faulty. 4. The cutter motor is faulty. 5. The trimmer controller PCB (PCB1) is faulty.

• Code: E5AA-8002
• Description: Error in the cutter motor (Finisher-K1). The cutter motor clock sensor does not come off the home position of the trimming blade when the cutter motor has been driven for 0.5 second.
• Remedy: 1. The connector of the cutter motor clock sensor (S108) or the cutter motor (M106) are disconnected. 2. The wiring of the cutter motor clock sensor/the cutter motor are faulty. 3. The cutter motor clock sensor is faulty. 4. The cutter motor is faulty. 5. The trimmer controller PCB (PCB1) is faulty.

• Code: E5AA-8003
• Description: Cutter motor clock error (Finisher-K1). The cutter motor clock sensor does not detect the motor clock when the cutter motor has been driven for 0.625 second.
• Remedy: 1. The connector of the cutter motor clock sensor (S108) or the cutter motor (M106) are disconnected. 2. The wiring of the cutter motor clock sensor/the cutter motor are faulty. 3. The cutter motor clock sensor is faulty. 4. The cutter motor is faulty. 5. The trimmer controller PCB (PCB1) is faulty.

• Code: E5AE-8000
• Description: Trimmer stationary paper error. The inlet sensor detects the stationary paper after performing the paper delivery operation.
• Remedy: 1. The paper has jammed in the trimmer. 2. The connector of the inlet sensor (S101) is disconnected. 3. The wire of the inlet sensor is faulty. 4. The inlet sensor is faulty. 5. The trimmer controller PCB (PCB1) is faulty.