Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon iR1022 — Trang 2/5

Code: 0104

Description: Pickup Delay Jam SR11
- After execution of a pickup retry, the registration sensor (SR11) does not detect the leading edge of paper within a specific period of time. Or after the duplex drive solenoid (SL1) is on, the registration sensor (SR11) does not detect the leading edge of paper within a specific period of time.
Remedy:

Code: 010c

Description: Delivery Sensor Delay Jam SR5
- After the registration sensor (SR11) has detected the leading edge of paper, the delivery sensor (SR5) does not detect the leading edge of paper within a specific period of time.
Remedy:

Code: 0208

Description: Pickup Stationary Jam SR11
- After the registration sensor (SR11) has detected the leading edge of paper, the registration sensor (SR11) does not detect the trailing edge of paper within a specific period of time.
Remedy:

Code: 0210

Description: Delivery Sensor Stationary Jam SR5
- The delivery sensor cannot detect absence of paper within the specified time after turning off of the registration clutch. - The delivery sensor cannot detect absence of paper within the specified time after the sensor detected the leading edge of paper.
Remedy:

Code: 0214

Description: Stationary jam in machine SR5, SR9
- After the registration sensor (SR11) has detected the trailing edge of paper, the delivery sensor (SR5) does not detect the trailing edge of paper within a specific period of time.
Remedy:

Code: 021c

Description: Wound Paper Jam at Fuser SR5, SR11
- The delivery sensor (SR5) has detected absence of paper within the prescribed time after it detected presence of paper.
Remedy:

Code: 1118

Description: Door open jam SR5, SR9, SR11, SW2
- The door was opened when there was printing paper in the transport path.
Remedy:

Code: E000-0000

Description: Startup error
- The temperature detected by the main or sub thermistor does not rise to the specified value during startup control.
Remedy: - Check the fixing film connector. - Replace the fixing film unit. - Replace the DC controller PCB.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie