Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon iR1023 — Trang 4/5

Code: E100-0000

Description: BD detection PCB failure
- The BD detection PCB is faulty.
Remedy: - Check the connector of the BD detection PCB. - Replace the laser scanner unit. - Replace the DC controller PCB.

Code: E196-0001

Description: Flash ROM write/read error
- The write/read of Flash ROM in the image processor PCB is faulty.
Remedy: - Replace the image processor PCB.

Code: E196-0002

Description: PCL ROM write/read error
- The write/read of PCL ROM in the image processor PCB is faulty.
Remedy: - Replace the PCL PCB. - Replace the image processor PCB.

Code: E197-0000

Description: Printer engine communication error
- Erroneous communication between the DC controller PCB and image processor PCB was detected.
Remedy: - Check the connectors of the DC controller PCB and image processor PCB. - Replace the DC controller PCB for normal connection. - Replace the image processor PCB.

Code: E716-0000

Description: Erroneous communication with optional cassette
- Disconnection of the optional cassette was detected after power-on, detection of normal connection to the optional cassette, and start of communication.
Remedy: - Check the connectors of the optional cassette PCB and DC controller PCB. - Replace the optional cassette PCB for normal connection. - Replace the DC controller PCB.

Code: E719-0000

Description: Erroneous communication with card reader (serial communication)
- Disconnection from the card reader has been detected since communication started after confirmation of normal connection to the card reader (after power-on).
- A serial communication error has occurred. (The serial communication error cannot be recovered.)
Remedy: - Check the connectors of the card reader and image processor PCB. - Replace the card reader for normal connection. - Replace the image processor PCB.

Code: E719-0001

Description: Erroneous communication with coin vendor (serial communication)
- Disconnection from the coin vendor has been detected since communication started after confirmation of normal connection to the coin vendor (after power-on).
- A serial communication error has occurred. (The serial communication error cannot be recovered.)
Remedy: - Check the connection between the image processor PCB and serial PCB. - Check the connectors of the serial PCB and coin vendor for normal connection. - Replace the serial PCB. - Check the coin vendor. - Replace the image processor PCB

Code: E730-0000

Description: inside error of the image processor PCB (PDL system error)
- The inside of the image processor PCB is faulty.
Remedy: - Replace the image processor PCB.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie