Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon iR2018 — Trang 2/6

Code: E019-0000

Description: Waste toner full detection
The waste toner full state was detected.
Remedy: Replace the drum unit.

Code: E019-0001

Description: Waster toner full detection sensor is faulty.
The waste toner full state was detected continuously for five or more seconds while the main motor was turning.
Remedy: - Check the connector of the waster toner full sensor. - Replace the waste toner full sensor. - Replace the DC controller PCB.

Code: E052-0000

Description: Erroneous connection to duplex unit
Disconnection of the duplex unit was detected after power-on, detection of normal connection to the duplex unit, and start of communication
Remedy: - Check the connectors of the duplex unit and DC controller PCB. - Replace the duplex controller PCB. - Replace the DC controller PCB.

Code: E100-0000

Description: BD detection PCB failure
The BD detection PCB is faulty
Remedy: - Check the connector of the BD detection PCB. - Replace the laser scanner unit. - Replace the DC controller PCB.

Code: E196-0001

Description: Image processor PCB failure
Error on writing and readout ROM of image processor PCB (mainn ROM).
Remedy: - Putting the switch on/off of the power supply. - Replace the image processor PCB.

Code: E196-0002

Description: Image processor PCB failure
Error on writing and readout ROM of image processor PCB (option ROM).
Remedy: - Putting the switch on/off of the power supply. - Replace the image processor PCB.

Code: E197-0000

Description: Printer engine communication error
Erroneous communication between the DC controller PCB and image processor PCB was detected.
Remedy: - Check the connectors of the DC controller PCB and image processor PCB. - Replace the DC controller PCB for normal connection. - Replace the image processor PCB.

Code: E261-0000

Description: Zero-cross signal error
If failed to detect zero-cross signal cycle of the power supply when initializing. When the input of the zero-signal failed continuously for three seconds while controlling the temperature adjustment.
Remedy: - Replace the power supply PCB. - Replace the DC controller PCB.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie