• Code: E355-0004
• Description: System information error
• Remedy:

• Code: E355-0005
• Description: System information error
• Remedy:

• Code: E500-0000
• Description: Communication error
  The communication with the host machine is interrupted.
• Remedy: 1.Check the cable. 2.Replace the Finisher Controller PCB (PCB1). 3.Replace the DC Controller PCB.

• Code: E505-0001
• Description: EEPROM error
  The checksum for the EEPROM data has an error.
• Remedy: 1.Replace the Finisher Controller PCB (PCB1).

• Code: E520-0001
• Description: Shift Motor (M4) error
  The shift roller does not leave the shift roller home position when the Shift Motor (M4) has been driven for 1.2 seconds.
• Remedy: 1.Replace the Shift Roller HP Sensor (S2). 2.Replace the Shift Motor (M4). 3.Replace the Finisher Controller PCB (PCB1).

• Code: E520-0002
• Description: Shift Motor (M4) error
  The shift roller does not return to the shift roller home position when the Shift Motor (M4) has been driven for 1.2 seconds.
• Remedy: 1.Replace the Shift Roller HP Sensor (S2). 2.Replace the Shift Motor (M4). 3.Replace the Finisher Controller PCB (PCB1).

• Code: E531-8001
• Description: Stapler Motor (M10) error
  The stapler does not leave the staple home position when the Staple Motor (M10) has been driven for 0.5 sec.
• Remedy: 1.Check the wiring between the Finisher Controller PCB and Stapler. 2.Replace the Stapler. 3.Replace the Finisher Controller PCB (PCB1).

• Code: E531-8002
• Description: Stapler Motor (M10) error
  The stapler does not return to the staple home position when the Stapler Motor (M10) has been driven for 0.5 sec.
• Remedy: 1.Check the wiring between the Finisher Controller PCB and Stapler. 2.Replace the Stapler. 3.Replace the Finisher Controller PCB (PCB1).