Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon iR2850 — Trang 11/15

Code: E602-0002

Description: A data read fault of the HDD is detected when the HDD is started up from the BOOT ROM
Causes: The wiring is faulty (short circuit, open circuit). The HDD is faulty. The main controller PCB is faulty.
Remedy: 1. Wiring Are the connection and the cable between connector J1025 of the main controller PCB and the connector J2005 of the HDD normal? NO: Correct the connector/cable. 2. System software Try re-installing the system software. Is the problem corrected? YES: End. 3. HDD, Main controller PCB Try replacing the HDD, and download the system software. Is the problem corrected? YES: End. NO: Replace the main controller PCB.

Code: E604-0000

Description: A fault is detected in the image memory
Causes: The wiring is faulty (short circuit, open circuit). The HDD is faulty. The main controller PCB is faulty.
Remedy:

Code: E605-0001

Description: A fault is detected in the battery for the image memory
Causes: The wiring is faulty (short circuit, open circuit). The HDD is faulty. The main controller PCB is faulty.
Remedy:

Code: E606-0001

Description: A mounting fault of the HDD is detected when the HDD is started up from the BOOT ROM
Causes: The HDD is faulty. The main controller PCB is faulty.
Remedy: 1. Wiring Are the connection and cable normal between the connector J1025 on the main controller PCB and the connector J2005 of the HDD? NO: Correct the connection and the cable. 2. System software Try re-installing the system software. Is the problem corrected? YES: End. 3. HDD, Main controller PCB Try replacing the HDD and downloading the system software. Is the problem corrected? YES: End. NO: Replace the main controller PCB.

Code: E674-0000

Description: A faulty occurs in the communication between the fax PCB and the main controller PCB
Causes: The wiring is faulty (short circuit, open circuit). The fax PCB is faulty. The main controller PCB is faulty.
Remedy: 1. Wiring Are the connection and the cable between the connector J 1005 on the main controller PCB and the connector J31 on the FAX PCB normal? NO: Correct the connection and the cable. 2. FAX PCB, Main controller PCB Try replacing the FAX PCB. Is the problem corrected? YES: End. NO: Replace the main controller PCB.

Code: E677-0001

Description: A fault occurs it the combination between any of the printer boards (accessories) and the main controller PCB
Causes: Any of the printer boards (accessories) is faulty. The main controller PCB is faulty.
Remedy: 1. Connector Is the printer board (accessory) connected correctly? NO: Correct the connection. 2. Printer board, Main controller PCB Try replacing the printer board. Is the problem corrected? YES: End. NO: Replace the main controller PCB.

Code: E710-0001

Description: When the main power is turned on, the communication IC (IPC) on the reader controller PCB cannot be initialized
Causes: The DC controller PCB is faulty. The reader controller PCB is faulty. The machine controller PCB is faulty.
Remedy: Turn off and then on the main power switch. Is the problem corrected? YES: End. NO: If E7100001, replace the reader controller PCB. If E710-002, replace the DC controller PCB. If E71-0003, replace the main controller PCB.

Code: E710-0002

Description: When the main power is turned on, the communication IC (IPC) on the DC controller PCB cannot be initialized
Causes: The DC controller PCB is faulty. The reader controller PCB is faulty. The machine controller PCB is faulty.
Remedy: Turn off and then on the main power switch. Is the problem corrected? YES: End. NO: If E7100001, replace the reader controller PCB. If E710-002, replace the DC controller PCB. If E71-0003, replace the main controller PCB.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie