Description: fault in the backup memory of the finisher (common among all finishers)
fault in the data stored in backup memory
Remedy: Turn off the main power. Check the wiring of the DC controller PCB and the finisher controller, and check the fuse of the 24-V power supply. Thereafter, turn the main power back on.
Description: fault in stack delivery motor (Finisher-S1)
When the stack retaining spacer is returned to home position, the belt escape home position sensor does not go on within 1.5 sec.
Remedy: Replace the finisher controller PCB. Replace the stack delivery motor. Check the stack delivery drive mechanism.
Description: fault in trailing edge assist motor (Finisher-Q3/ Q4)
The home position sensor does not go off even when the trailing edge assist motor has rotated for a specific period of time.
Remedy: Replace the finisher control PCB. Replace the trailing edge assist motor.
Description: fault in stack delivery motor (Finisher-S1)When the stack retaining spacer is shifted from home position, the belt escape home position sensor does not go off within 1.5 sec.
Remedy: Replace the finisher controller PCB. Replace the stack delivery motor. Check the stack delivery drive mechanism.
Description: fault in trailing edge assist motor (Finisher-Q3/ Q4)
The home position sensor does not go on even after the trailing edge assist motor has rotated for a specific period of time.
Remedy: Replace the finisher control PCB. Replace the trailing edge assist motor.
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.