Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon iR3035 — Trang 11/24

Code: E540-0004

Description: Upper tray ascent/descent motor error (Finisher -Q3/ Q4)
Safety switch activation
Remedy: Check the No. 1 tray closed detecting switch. Replace the finisher controller PCB.

Code: E540-8002

Description: Stack tray motor error (Finisher-S1)
The operation to detect the paper surface of the stack tray does not end within 1.0 sec.
Remedy: Replace the finisher controller PCB. Replace the tray ascent/ descent motor. Check the stack tray drive mechanism. Check the paper surface sensor.

Code: E540-8003

Description: Stack tray motor error (Finisher-S1)
An abnormal combination of sensor states has been detected.
Remedy: Replace the finisher controller PCB. Check the stack tray upper limit sensor. Check the stack tray lower limit sensor. Check the stack tray upper paper surface sensor. Check the stack tray lower paper surface sensor.

Code: E542-0002

Description: Lower tray ascent/descent motor error (Finisher-Q3/ Q4
Lower tray ascent/descent motor clock error
Remedy: Replace the No. 2 tray shift motor. Replace the finisher controller PCB. Check the tray ascent/descent mechanism.

Code: E542-0003

Description: Lower tray ascent/descent motor error (Finisher-Q3/ Q4
Area error
Remedy: Replace the No. 2 tray shift area sensor PCB. Replace the finisher controller PCB.

Code: E577-8001

Description: Paddle error (Finisher-S1)
The paddle home position sensor does not go on within 1.5 sec when the paddle is shifted to home position.
Remedy: Check the paddle motor. Check the paddle home position sensor. Replace the finisher controller PCB.

Code: E577-8002

Description: Paddle error (Finisher-S1)
The paddle home position sensor does not go off within 1.0 sec when the paddle is moved to home position.
Remedy: Check the paddle motor. Check the paddle home position sensor. Replace the finisher controller PCB.

Code: E584-0001

Description: Shutter unit error (Finisher-Q3/ Q4)
The shutter open sensor does not go off (i.e., the shutter does not close).
Remedy: Check the stack edging motor. Check the open/ close clutch. Check the shutter home position sensor. Replace the finisher controller PCB.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie