Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon iR3045 — Trang 5/24

Code: E227-0002

Description: The reader unit power supply is faulty.
At the start of a job, the 24-V port is off.
Remedy: Disconnect and then connect the power supply harness connector. Replace the power supply.

Code: E227-0003

Description: The reader unit power supply is faulty.
At the end of a job, the 24-V port is off.
Remedy: Disconnect and then connect the power supply harness connector. Replace the power supply.

Code: E227-0004

Description: The reader unit power supply is faulty.
When a load is being driven, the 24-V port is off.
Remedy: Disconnect and then connect the power supply harness. Replace the power supply.

Code: E248-0000

Description: The backup memory is faulty.
[Cause] A check error has occurred on the backup SRAM board. [Location] bottom ROM [Timing of Detection] once when the boot ROM is started up
Remedy: 1. Check the presence/absence of a backup SRAM PCB. 2. Disconnect and then connect the backup SRAM PCB. 3. Replace the backup SRAM PCB with a new one.

Code: E248-0001

Description: The backup memory is faulty.
An error has occurred at power-on.
Remedy: Replace the reader controller PCB.

Code: E248-0002

Description: The backup memory is faulty.
An error has occurred during a write operation.
Remedy: Replace the reader controller PCB.

Code: E248-0003

Description: The backup memory is faulty.
An error has occurred during a read operation following a write operation.
Remedy: Replace the reader controller PCB.

Code: E261-0000

Description: The zero-cross signal is faulty.
When the relay is on, the zero-cross signal is not detected for 500 msec or more.
Remedy: Replace the AC driver PCB. Replace the DC controller PCB.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie