Description: Punch motor error
The punch home position sensor is not defected even after the motor has stopped at time of punch motor initial operation.
Remedy: Check the punch motor. Check the punch motor clock sensor. Check the punch driver PCB. Replace the finisher controller PCB.
Description: Paper trailing edge sensor/ horizontal sensor error
Error in light-receiving voltage when light is emitted (trailing edge sensor)
Remedy: Check the paper trailing edge sensor. Check the horizontal registration sensor. Check the punch driver PCB. Replace the finisher controller PCB.
Description: paper trailing edge sensor/ registration sensor error
Error in light-receiving voltage when light is not emitted (trailing edge sensor)
Remedy: Check the paper trailing edge sensor. Check the horizontal registration sensor. Check the punch drive PCB. Replace the finisher controller PCB.
Description: Power trailing edge sensor/ registration sensor
Error in light-receiving voltage when light is emitted (horizontal registration sensor 1)
Remedy: Check the paper trailing edge sensor. Check the horizontal registration sensor. Check the punch driver PCB. Replace the finisher controller PCB.
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.