Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon iR3225 — Trang 14/30

Code: E537-8001

Description: Front alignment error (Finisher-S1)
The home position sensor does not go on within 2.0 sec when the front aligning plate is moved to home position.
Remedy: Replace the finisher controller PCB. Replace the front alignment motor. Check the front aligning plate drive mechanism. Check the front alignment home position sensor.

Code: E537-8002

Description: Front alignment error (Finisher-S1)
The home position sensor dos not go off within 1.0 sec when the front aligning plate is shifted from home position.
Remedy: Replace the finisher controller PCB. Replace the front alignment motor. Check the front aligning plate drive mechanism. Check the front alignment home position sensor.

Code: E540-0002

Description: Upper tray ascent/descent motor error (External finisher)
Upper tray ascent/descent motor clock error
Remedy: Replace the No. 1 tray shift motor. Replace the finisher controller PCB. Check the tray ascent/descent mechanism.

Code: E540-0003

Description: Area error
Remedy: Replace the No. 1 tray area sensor PCB. Replace the finisher controller PCB.

Code: E540-0004

Description: Safety switch activation
Remedy: Check the No. 1 tray closed detecting switch. Replace the finisher controller PCB.

Code: E540-8002

Description: Stack tray motor error (FinisherS1)
The operation to detect the paper surface of the stack tray does not end within 1.0 sec.
Remedy: Replace the finisher controller PCB. Replace the tray ascent/descent motor. Check the stack tray drive mechanism. Check the paper surface sensor.

Code: E540-8003

Description: Stack tray motor error (FinisherS1)
An abnormal combination of sensor states has been detected.
Remedy: Replace the finisher controller PCB. Check the stack tray upper limit sensor. Check the stack tray lower limit sensor. Check the stack tray upper paper surface sensor. Check the stack tray lower paper surface sensor.

Code: E542-0002

Description: Lower tray ascent/descent motor error (External finisher)
Lower tray ascent/descent motor clock error
Remedy: Replace the No. 2 tray shift motor. Replace the finisher controller PCB. Check the tray ascent/descent mechanism
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie