Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon iR3245 — Trang 5/30

Code: E202-0002

Description: There is an error in the detection of the CCD home position.
The attempt to detect the home position fails when the CCD is moved back.
Remedy: Disconnect and then connect the harness connector. Replace the optical HP sensor, optical motor, and reader controller PCB.

Code: E225

Description: The light intensity of the CCD is faulty.
Remedy: Disconnect and then connect the flexible cable. Replace the flexible cable, CCD unit, and reader controller PCB.

Code: E227-0001

Description: The reader unit power supply (24V) is faulty.
At time of power-on, the 24V port is off.
Remedy: Disconnect and then connect the power supply harness connector. Replace the power supply.

Code: E227-0002

Description: The reader unit power supply (24V) is faulty.
At the start of a job, the 24V port is off.
Remedy: Disconnect and then connect the power supply harness connector. Replace the power supply

Code: E227-0003

Description: The reader unit power supply (24V) is faulty.
At the end of a job, the 24V port is off.
Remedy: Disconnect and then connect the power supply harness connector. Replace the power supply.

Code: E227-0004

Description: The reader unit power supply (24V) is faulty.
When a load is being driven, the 24V port is off.
Remedy: Disconnect and then connect the power supply harness connector. Replace the power supply.

Code: E248-0001

Description: EEPROM error
An error has occurred at power-on.
Remedy: Replace the reader controller PCB.

Code: E248-0002

Description: EEPROM error
An error has occurred during write operation.
Remedy: Replace the reader controller PCB.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie