Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon iR3245 — Trang 11/30

Code: E514-0002

Description: fault in stack delivery motor (Finisher-S1)
When the stack retaining spacer is shifted from home position, the belt escape home position sensor does not go off within 1.5 sec.
Remedy: Replace the finisher controller PCB. Replace the stack delivery motor. Check the stack delivery drive mechanism.

Code: E514-0002

Description: fault in trailing edge assist motor (External finisher)
The home position sensor does not go on even after the trailing edge assist motor has rotated for a specific period of time.
Remedy: Replace the finisher control PCB. Replace the trailing edge assist motor

Code: E519-0001

Description: Gear change motor error (External finisher)
The home position sensor does not go off even when the gear change motor has rotated for a specific period of time.
Remedy: Replace the finisher controller PCB. Replace the gear change motor. Check the gear change mechanism.

Code: E519-0002

Description: Gear change motor error (External finisher)
The home position sensor does not go on even when the gear change motor has rotated for a specific period of time.
Remedy: Replace the finisher controller PCB. Replace the gear change motor. Check the gear change mechanism.

Code: E520-0001

Description: The offset motor or the finisher controller PCB is faulty. The offset home position sensor is faulty (Finisher-S1).
While the offset motor is in operation, drive was applied for 1000 msec for movement toward the home position sensor; however, the offset home position sensor does not go on.
Remedy: Replace the offset motor. Replace the offset home position sensor. Replace the finisher controller PCB.

Code: E520-0002

Description: The offset motor or the finisher controller PCB is faulty. The offset home position sensor is faulty (Finisher-S1).
While the offset motor is in operation, drive was applied for 1000 msec for movement away from the home position sensor; however, the offset home position sensor does not go off.
Remedy: Replace the offset motor. Replace the offset home position sensor. Replace the finisher controller PCB.

Code: E530-0001

Description: Front alignment error (External finisher)
The home position sensor does not go off even when the front alignment motor has been rotated for a specific period of time.
Remedy: Replace the finisher controller PCB. Replace the front alignment motor. Check the front aligning plate drive mechanism. Check the front alignment home position sensor.

Code: E530-0002

Description: Front alignment error (External finisher)
The home position sensor does not go on even when the front alignment motor has been rotated for a specific period of time.
Remedy: Replace the finisher controller PCB. Replace the front alignment motor. Check the front aligning plate drive mechanism. Check the front alignment home position sensor.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie