Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon iR5055 — Trang 19/21

Code: E730

Description: There is a fault in the PDL software
Remedy: - Execute PDL resetting. - Turn off and then on the main power. - Check the connection of the SURF board. - Re-install the firmware. - Replace the main controller PCB.

Code: E732-0001

Description: Error in reader communication
There is a communication error between the reader and main controller (DDI-S communication error), or between the reader and the charger unit.
Remedy: - Check the communication between the reader unit and the main controller. - Check the power supply of the reader unit. (Check to see if initialization takes place at start-up.) - Replace the reader controller PCB, reader relay PCB, or main controller PCB. - Check the connection of the charger unit. (iR5075/5075N only.)

Code: E732-8888

Description: Error in reader communication
Error in difference of scanner
Remedy: - check the scanner model - in service mode, select: COPIER > OPTION > BODY > SCANTYPE to check

Code: E733-0000

Description: There is a fault in the printer communication.
The attempt at communication with the printer fails at start-up.
Remedy: - Check the connection of the cable between the DC controller and the main controller. - Check the power supply of the printer. (Check to see if initialization takes place at start-up.) - Replace the DC controller PCB or the main controller PCB.

Code: E733-0001

Description: There is a fault in the printer communication.
There is a DDI-P communication error.
Remedy: - Check the connection of the cable between the DC controller and the main controller. - Check the power supply of the printer. (Check to see if initialization takes place at start-up.) - Replace the DC controller PCB or the main controller PCB.

Code: E740-0002

Description: There is a fault in the Ethernet board.
The MAC address is illegal.ernet board.
Remedy: - Replace the main controller PCB.

Code: E744

Description: There is a fault in the language file/boot ROM.
Remedy: - Download the language file of the correct version. - Replace the boot ROM with one of the appropriate version.

Code: E746-0003

Description: There is an error caused by a mismatch of the accessories board.
At start-up, a UFR board for a different model has been detected.
Remedy: - Replace the UFR board with one for the model in question.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie