Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon iR6020 — Trang 14/16

Code: E712-0001

Description: The connector is not connected properly. The ADF 24-V power supply is faulty. The ADF controller PCB is faulty. The reader controller PCB is faulty.
Communication does not resume in 3 secs after data has been written to the error register of the communication IC (IPC) of the ADF controller PCB.

Code: E712-0002

Description: The connector is not connected properly. The ADF 24-V power supply is faulty. The ADF controller PCB is faulty. The reader controller PCB is faulty.
The transmission bit is not enabled after a period of 10 sec at the sync register of the IPC (IC5021) on the reader controller PCB.

Code: E713-0000

Description: The connector is not connected properly. The finisher accessories power supply PCB is faulty. The finisher controller PCB is faulty. The DC controller PCB is faulty.
The communications IC (IPC) on the finisher controller has gone out of order.

Code: E717-0001

Description: The wiring is faulty (short circuit, open circuit). The copy data controller or the remote diagnostic device is faulty. The main controller PCB is faulty.
The copy data controller or the NE controller is out of order or an open circuit has been detected.
The error must be reset in service mode (COPIER>FUNCTION> CLEAR>ERR).

Code: E719-0001

Description: The wiring is faulty (short circuit, open circuit). The coin vendor is faulty. The main controller PCB is faulty.
The communication between the coin vendor and the main controller PCB has been interrupted.
The error must be reset in service mode (COPIER>FUNCTION> CLEAR>ERR).

Code: E732-0001

Description: The connector has poor contact. The reader controller PCB is faulty.
The main controller PCB has detected an error in the communication between the reader controller PCB and the main controller PCB.

Code: E732-9999

Description: The connector has poor contact. The reader controller PCB is faulty.
In a printer mode, a read unit is detected by the main controller PCB.

Code: E733-0001

Description: The connector has poor contact. The DC controller PCB is faulty.
The main controller PCB has detected an error in the communication between the DC controller PCB and the main controller PCB.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie